Whirlpool Top-Load Washer Code uL: Unbalanced Load Needs Rearranging
uL on an older Whirlpool top-load HE washer reports the same unbalanced load as OFb. The washer needs you to even out the clothes, close the lid and press Start/Pause.
What does Whirlpool washer code uL mean?
uL on an older Whirlpool top-load HE washer from the Cabrio and WTW family reports the same unbalanced load as OFb. The washer could not fix the imbalance by its automated methods and needs your help to redistribute the load around the wash plate. If the display is flashing and the washer has stopped, wait for the lid to unlock, even out the load, close the lid and press Start/Pause. You may feel vibration during the spin, or see all the dial lights flashing.
uL at a glance
- Code
- uL
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool Cabrio and WTW top-load HE washers
- Type
- Maintenance reminder
- Can you clear it yourself?
- Usually, once the care step is done
- Most likely cause
- Load clumped to one side of the wash plate
What you may notice with uL
- uL on the display or all the dial lights flashing
- Vibration as the spin begins to build
- The washer stopped with a lopsided load
- A lid that unlocks only after the basket stops
How the washer detects uL
The washer checks balance as it builds speed for the spin. A basket with clothes spread evenly turns steadily. A basket with the load clumped on one side wobbles, and the washer senses that wobble through its motor and sensing circuit.
It first tries its automated methods to redistribute the clothes, such as adding water and moving the basket. When these do not work, the washer stops, flashes the display and shows uL. The code means the same as OFb. Adding wet items or extra water to a load that is already running upsets the balance and can bring it on. Because it waits for you, the cycle resumes with Start/Pause once the clothes are even. A well-spread load that keeps stopping points to the balance sensing instead.
Why uL appears
- Load clumped to one side of the wash plate
- Wet items or extra water added to a load already running
- Single item such as a rug or jacket washed alone
- Balance sensing, if a well-spread load still stops the washer
Can you keep using the washer with uL?
Yes, you can keep using the washer once the load is even. Wait for the lid to unlock, spread the clothes in loose heaps, close the lid and press Start/Pause. Do not reach into a basket that is still turning. If uL returns after you rebalance the load with a level washer, stop using it until the suspension and balance sensing are tested.
What you can safely check
- Wait for the basket to stop completely and for the lid to unlock, and unplug the washer if it is shaking.
- Open the lid and spread the clothes in loose heaps around the wash plate.
- Close the lid and press Start/Pause to resume.
- Next time, pair a single bulky piece with a few towels.
- If an even load still brings uL, call us.
What our technician does for uL
- Test with a balanced load
- Inspect the suspension
- Test the balance sensing
How to keep uL from coming back
- Pair a single rug or jacket with a few towels so the weight is shared
- Avoid adding wet items or extra water to a load that is already running
- Spread clothes in loose heaps around the wash plate before closing the lid
- Check that the washer sits level and does not rock
Technical reference
- Code
- uL
- Appliance
- Whirlpool washer
- Control family
- Whirlpool Cabrio and WTW top-load HE washers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
uL questions
Why shouldn't I add wet items to a running load?
Adding wet items or extra water mid-cycle can upset the balance. Even a small change can shift the weight to one side and bring the washer to a stop with uL.
Does uL mean the same as OFb?
Yes, in practice. Both show that the load is unbalanced and needs to be redistributed by hand. Which one you see depends on the display.
What should I do when all the dial lights are flashing?
Wait for the lid to unlock, rebalance the load and press Start/Pause. If the lights flash again with an even load, the washer may be unlevel or have a balance problem that can be tested.
Will uL clear by itself?
No. The washer waits until you redistribute the load, and then it resumes when you press Start/Pause. If the lights flash again with a well-spread load, the problem is more likely the leveling, the suspension or the balance sensing.
What is the difference between uL and oL?
uL points to an uneven load, while oL says the load is too heavy. They are close in the fix, since both need the clothes lightened or rearranged, but the display names two different problems, so the checks are separate.
Something else going on with your washer?
We trace the cause in your home first and write the price down before any part is swapped.