(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Top-Load Washer Multiple Lights Flashing: Unbalanced Load

When several lights flash together on an older Whirlpool top-load HE washer, the load is out of balance. The washer stops instead of spinning hard, and spreading the clothes evenly fixes it.

Maintenance reminderChecked November 2026

What does Whirlpool washer code Multiple Lights Flashing mean?

When several indicator lights flash together on an older Whirlpool top-load HE washer from the Cabrio and WTW family, the washer is telling you the load is out of balance. If the clothes are not spread evenly around the basket when spinning begins, the basket shifts, causing noise, vibration, reduced spin speed, longer cycles and weaker results. The washer stops with the lights flashing instead of running a violent spin. One heavy item, a wet rug or a very full tub brings it on most.

Multiple Lights Flashing at a glance

Code
Multiple Lights Flashing
Appliance
Whirlpool washer
Applies to
Whirlpool Cabrio and WTW top-load HE washers
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
Load bunched on one side of the basket

What you may notice with Multiple Lights Flashing

  • Several indicator lights flashing at the same time
  • Loud thumping or shaking during the spin
  • The cycle stopped before the spin finishes
  • Clothes balled up on one side of the basket

How the washer detects Multiple Lights Flashing

Before the washer builds up speed for the spin, it turns the basket and measures how smoothly it moves. A load that is spread evenly spins with little motion. A load bunched on one side makes the basket swing off center, and the control notices that wobble.

The washer first tries its own routines to redistribute the clothes. If the wobble remains, it stops rather than continue, because a heavy unbalanced basket spinning fast could slam against the cabinet and strain the suspension. To tell you, it flashes several lights together. The usual causes are one bulky item washed alone, a wet rug or a packed tub. A washer that does not sit level makes the problem more likely, so the floor and feet matter too.

Why Multiple Lights Flashing appears

  • Load bunched on one side of the basket
  • Overloaded tub or one bulky item washed alone
  • Washer not level on the floor
  • Control reading, if a balanced load still gives the same lights

Can you keep using the washer with Multiple Lights Flashing?

Yes, you can keep using the washer once you have spread the clothes evenly or removed a few items. Stop it if the cabinet thumps or walks across the floor, and never reach into the basket until it has fully stopped. If a small, balanced load still brings the flashing lights, stop using the washer until the leveling and suspension are checked.

What you can safely check

  1. Pause or cancel the cycle, and wait for the basket to stop and the lid to unlock before reaching in.
  2. Spread the clothes evenly around the basket and take out a few items if it is packed.
  3. Add a towel or two if you were washing a single bulky item.
  4. Cut power for five minutes at the outlet, restore it and restart.
  5. If a small, balanced load still flashes the lights, call us.

What our technician does for Multiple Lights Flashing

  • Check that the washer is level
  • Inspect the suspension
  • Test the balance sensing and the control

How to keep Multiple Lights Flashing from coming back

  • Wash bulky single items together with a few towels so the weight is shared
  • Avoid packing the basket to the top, and let clothes sit loosely
  • Check that all four feet touch the floor firmly and the washer does not rock
  • Spread wet loads around the wash plate before you close the lid

Technical reference

Code
Multiple Lights Flashing
Appliance
Whirlpool washer
Control family
Whirlpool Cabrio and WTW top-load HE washers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Multiple Lights Flashing questions

Why do all the lights flash at once?

It is the washer's way of saying it needs your help. The load is out of balance, and the washer stopped before the spin could shake the cabinet. Redistribute the clothes and restart.

How do I avoid it next time?

Do not wash a single heavy item alone. Mix a rug or jacket with a few towels, load loose heaps evenly around the plate, and avoid packing the basket to the top.

Could the floor be the cause?

Yes. A washer that rocks or sits unlevel is more likely to go out of balance. Check that all four feet touch the floor firmly. If it still happens, the leveling and suspension should be checked.

Is the flashing lights code the same as OFb?

They describe the same kind of problem, a load out of balance. The several flashing lights are the indicator version on some displays, while OFb is the text version on others. The fix is the same: redistribute the clothes and make sure the washer is level.

Will it clear by itself?

After you rearrange the load and restart, the washer should spin normally. If the same lights flash again with a small, even load, the cause is the leveling, the suspension or the control, and it needs a closer look.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair