(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Top-Load Washer Code OFb or ofb: Load Out of Balance

OFb, or ofb in lowercase, means the load is out of balance on an older Whirlpool top-load HE washer. You need to redistribute the clothes by hand before the spin can begin.

Maintenance reminderChecked November 2026

What does Whirlpool washer code OFb or ofb mean?

OFb, which may show as ofb in lowercase, means the load is out of balance on an older Whirlpool top-load HE washer from the Cabrio and WTW family. The washer tried its own routines to correct the imbalance and could not, so it now needs you to redistribute the load evenly around the wash plate. Until then, the cycle stays stopped or the spin will not begin. Shaking, loud thumping and wet clothes after the cycle are the usual signs.

OFb or ofb at a glance

Code
OFb or ofb
Appliance
Whirlpool washer
Applies to
Whirlpool Cabrio and WTW top-load HE washers
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
Clothes tangled or bunched on one side of the wash plate

What you may notice with OFb or ofb

  • OFb or ofb on the display
  • Loud thumping and shaking before the spin
  • The cycle stopped or the spin not starting
  • Soaking wet clothes after the cycle

How the washer detects OFb or ofb

As the spin approaches, the control turns the basket and senses how steadily it moves. If the clothes are bunched on one side, the basket swings off center. The washer tries to fix this itself by running its own balancing routines, such as adding water and tumbling the load again.

When those routines fail, the control gives up and shows OFb, asking for your help. It stops because spinning a lopsided basket quickly is hard on the suspension and the cabinet. The lowercase ofb means the same thing on some displays. The usual causes are a tangled load, a basket packed too full or one heavy item washed alone. A floor that is not level can add to it, which is why a load that is even and still flagged leads us to the leveling and suspension.

Why OFb or ofb appears

  • Clothes tangled or bunched on one side of the wash plate
  • Overloaded basket or a single heavy item
  • Washer sitting unlevel on the floor
  • Suspension or balance sensing, if loads are even and the code returns

Can you keep using the washer with OFb or ofb?

Yes, you can keep using the washer after you rearrange the load. Wait for the basket to stop, spread the clothes evenly and remove a few items if the tub is packed. Never reach in while it moves. If even loads still bring OFb, stop using the washer and have the leveling and suspension inspected, since repeated imbalance wears them.

What you can safely check

  1. Cancel the cycle with the Start button, or disconnect the power cord, and wait until the basket has stopped.
  2. If water is still in the tub, run a drain-only cycle first.
  3. Rearrange the clothes or remove some items so the load is level, and try the Bulky or Heavy Duty cycle.
  4. If you only need the water out, run a Drain & Spin once the load is even.
  5. If even loads keep bringing OFb, call us.

What our technician does for OFb or ofb

  • Check that the washer is level
  • Inspect the suspension
  • Test the balance sensing

How to keep OFb or ofb from coming back

  • Mix a single bulky item with a few towels so the weight is spread
  • Load clothes loosely around the wash plate and avoid packing the tub
  • Check that the washer sits level and does not rock
  • Wash rugs and bedding in smaller portions, with towels mixed in

Technical reference

Code
OFb or ofb
Appliance
Whirlpool washer
Control family
Whirlpool Cabrio and WTW top-load HE washers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

OFb or ofb questions

Is OFb the same as ofb?

Yes. Some displays show the letters in capitals and others in lowercase. Both mean the load is out of balance and needs to be redistributed by hand.

Why does the washer stop instead of just spinning?

A badly unbalanced basket can slam into the cabinet and damage the suspension. The washer stops, shows OFb, and waits for you to rearrange the load safely.

Which items throw the load off balance?

A single rug, a jacket or a pair of jeans washed alone. Mixing them with a few towels spreads the weight and keeps the basket steady during the spin.

Will OFb clear by itself?

It clears when you redistribute the load and restart. The washer cannot fix a badly lopsided load on its own after its balancing routines have failed. If the code returns with a small, even load, the leveling and suspension need checking.

Is OFb the same as the flashing lights code?

They describe the same condition, an out-of-balance load, shown differently on different displays. Some washers flash several lights and others show OFb. The steps are the same: rearrange the load and make sure the washer is level.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair