Whirlpool Top-Load Washer Sense and Wash Flashing: Unbalanced Spin
When the Sense and Wash lights flash together on a Whirlpool top-load HE washer, the load is likely out of balance at the start of the spin. Spreading the clothes evenly and restarting is the usual fix.
What does Whirlpool washer code Sense and Wash Flashing mean?
When the Sense and Wash lights flash together on a Whirlpool top-load HE washer from the Cabrio and WTW family, the likely reading is an out-of-balance load. If the clothes sit unevenly as the spin starts, the basket sways, which makes noise, shakes the cabinet, slows the spin and lengthens the cycle. The alert comes after the wash portion ends, at the start of the spin. Loud thumping and clothes that stay wet are the signs, and a big imbalance can stop the spin entirely.
Sense and Wash Flashing at a glance
- Code
- Sense and Wash Flashing
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool Cabrio and WTW top-load HE washers
- Type
- Maintenance reminder
- Can you clear it yourself?
- Usually, once the care step is done
- Most likely cause
- Clothes balled up or heaped to one side
What you may notice with Sense and Wash Flashing
- The Sense and Wash lights flashing together
- Loud thumping as the spin starts
- The washer stopping before the spin finishes
- Clothes still wet after the cycle
How the washer detects Sense and Wash Flashing
During the wash the basket turns slowly, so a lopsided load hardly shows. The test comes when the washer starts to build speed for the spin. At that point any uneven weight makes the basket sway, and the control notices the motion.
If the sway is more than it should be, the washer stops the spin to protect itself and flashes the Sense and Wash lights together. That is why the alert appears right after the wash portion ends. A single bulky item, a heavy load or clothes heaped on one side are the common causes. The floor matters as well, since a washer that rocks on its feet adds motion of its own. If a well-spread load still brings the lights, the balance sensing is the part to test.
Why Sense and Wash Flashing appears
- Clothes balled up or heaped to one side
- Single bulky item or very heavy load
- Washer not level or rocking on its feet
- Balance sensing, if loads are even and lights still flash
Can you keep using the washer with Sense and Wash Flashing?
Yes, you can use the washer again once you spread the clothes evenly and take out a few items if the tub is packed. Watch the first spin. If the cabinet thumps hard or walks across the floor, stop it. If the lights keep flashing with a small, even load, stop using the washer until the leveling and suspension are checked.
What you can safely check
- Pause the washer, wait for the basket to stop and the lid to unlock, and unplug it if the cabinet is shaking.
- Open the lid and spread the clothes loosely and evenly around the basket.
- Take out a few pieces if the tub is packed to the top.
- Close the lid and restart with the spin or a Drain & Spin cycle.
- If even loads keep flashing these lights, call us.
What our technician does for Sense and Wash Flashing
- Check that the washer is level and sits firmly on its feet
- Inspect the suspension
- Test the balance sensing
How to keep Sense and Wash Flashing from coming back
- Wash a single bulky item together with a few towels so the weight is shared
- Load clothes loosely around the basket instead of packing the tub
- Check that all four feet touch the floor and the washer does not rock
- Spread wet items out before you close the lid
Technical reference
- Code
- Sense and Wash Flashing
- Appliance
- Whirlpool washer
- Control family
- Whirlpool Cabrio and WTW top-load HE washers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
Sense and Wash Flashing questions
Why does it happen at the spin and not earlier?
Washing happens slowly, so a lopsided load hides. Spinning is fast, and any imbalance shows up as shaking. The washer notices it when the speed rises and stops to protect itself.
What are the signs of an unbalanced load?
Loud noises during the spin, heavy shaking and clothes that are still wet afterward. In some cases the washer simply stops spinning when it detects a large imbalance.
Can an unlevel washer cause this?
Yes. A washer that rocks or leans is much more likely to throw its spin off. Check that all four feet are firmly planted and adjust them if needed before blaming the control.
Is Sense and Wash Flashing the same as OFb or uL?
They describe the same kind of problem, an unbalanced load. The two flashing lights are the indicator version on some displays, while OFb and uL are text versions on others. The fix is to redistribute the clothes and confirm that the washer is level.
Will the lights stop flashing by themselves?
Not until the load is rearranged. The washer waits for you to even it out, then continues when you restart. If the lights return with an even, small load, the leveling, suspension or balance sensing needs a closer look.
Something else going on with your washer?
We trace the cause in your home first and write the price down before any part is swapped.