Whirlpool Washer F0E7: Clean Washer Cycle Stopped by a Load
F0E7 means the washer found clothing in the drum when the Clean Washer cycle tried to run. Empty the drum completely and start the cleaning cycle again.
What does Whirlpool washer code F0E7 mean?
F0E7 is shown when the washer finds clothing while the Clean Washer cycle is trying to run. The message is the same on Whirlpool front-load Duet and WFW washers such as the WFW9150WW, on top-load HE washers such as the WTW7500GC and on stacked laundry tower washers. A cleaning cycle needs an empty drum, so the washer stops and keeps F0E7 on the display until the load is removed. If the code returns after the drum is empty, the washer needs a closer look.
F0E7 at a glance
- Code
- F0E7
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool Duet and WFW front-load, WTW top-load and laundry tower
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Clothes or one stray sock left in the drum when Clean Washer was selected
What you may notice with F0E7
- F0E7 shows right after you start Clean Washer
- The cleaning cycle does not begin at all
- A small item sits in the gasket fold or basket rim
- Normal wash cycles run without any trouble
How the washer detects F0E7
The Clean Washer cycle exists to wash the tub itself, so it is designed to run with nothing inside. Before it starts, the control checks whether the drum holds a load, using the way the drum and water respond.
If it finds one, it will not begin the cleaning routine. It stops and shows F0E7, because cleaner and heat meant for the tub would end up on your clothes. The check works the same way across front-load Duet and WFW washers, top-load HE washers and stacked laundry towers. A single sock in the gasket fold, a towel stuck at the basket rim or an item under the agitator is enough for the washer to read a load. If the drum is empty and F0E7 still appears, the load sensing is the next thing to test.
Why F0E7 appears
- Clothes or one stray sock left in the drum when Clean Washer was selected
- Clean Washer chosen by mistake instead of a wash cycle
- Load sensing that reads a load that is not there
Can you keep using the washer with F0E7?
Yes. F0E7 only blocks the Clean Washer cycle, and ordinary wash cycles are not affected. Empty the drum, check the gasket folds or basket rim, and run the cleaning cycle again. If the code stays after the drum is truly empty, or if it shows during a normal wash, stop relying on the cycle and have the load sensing tested instead of forcing repeated starts.
What you can safely check
- Stop the washer and make sure the drum has stopped turning before you open the lid or door.
- Take out all clothing.
- Check the door gasket folds or the basket rim for a small item.
- Restart the Clean Washer cycle with the washer empty.
- If F0E7 stays with an empty drum, stop and call us.
What our technician does for F0E7
- Test the load sensing when the drum is truly empty
- Search the basket and tub for items that hide from view
- Check the controls only after the drum is ruled out
How to keep F0E7 from coming back
- Empty the drum fully before you choose Clean Washer
- Check the door gasket and basket rim for stray socks
- Pick the cycle with care so Clean Washer is not chosen by mistake
Technical reference
- Code
- F0E7
- Appliance
- Whirlpool washer
- Control family
- Whirlpool Duet and WFW front-load, WTW top-load and laundry tower
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
F0E7 questions
Did I choose the wrong cycle?
Possibly. F0E7 appears when Clean Washer is selected and the washer finds a load inside. Make sure the drum is empty, or pick a normal wash cycle if you meant to wash clothes.
How can I be sure the drum is empty?
On a front-loader, run your hand around the door seal. On a top-loader, check under the agitator and around the basket rim. Small items tend to hide in those spots.
Does F0E7 mean the sensor has broken?
Not by itself. The code says a load was found. Only if it appears on a truly empty washer do we test the sensing.
Is F0E7 the same as F0E1?
They are close cousins. Both mean a load was found when the Clean Washer cycle tried to run. The code letters differ by platform, and the fix is the same: empty the drum and start the cleaning cycle again.
Will F0E7 clear by itself?
It clears once the washer no longer senses a load and you restart Clean Washer. Waiting alone changes nothing while clothes are still inside, so remove everything first and then start the cycle again.
Something else going on with your washer?
We trace the cause in your home first and write the price down before any part is swapped.