(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Front-Load Washer F3 E5: Power Reset Is the Only Owner Step

F3 E5 on a Whirlpool Duet or WFW front-load washer is a control-level code. The guidance is only to cycle power at the control, so the reset is a test and not a fix.

Needs attention soonChecked November 2026

What does Whirlpool washer code F3 E5 mean?

F3 E5 appears on Whirlpool Duet and WFW front-load washers, current and older, including models like the WFW9150WW and WFW5620HW. The washer halts and shows the code, and the guidance is limited to cycling power at the control. No part or cause is given, which means the display alone cannot say whether the trouble is a sensor, a wire or the control board itself. For that reason we describe it as a control-level code, and the reset is a test.

F3 E5 at a glance

Code
F3 E5
Appliance
Whirlpool washer
Applies to
Whirlpool front-load washers, Duet and WFW series
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Control stop that clears with a full reset

What you may notice with F3 E5

  • F3 E5 appears and the washer halts
  • The display gives no sign of a part or cause
  • The code clears after a reset, or returns
  • The cycle will not start until power is cycled

How the washer detects F3 E5

The control in a front-load washer supervises each stage of the cycle, and it stops everything when a stage does not go as expected. F3 E5 is a stop of this kind, and the one thing the guidance asks for is a power cycle at the control.

Because no sensor, wire or board is named, the display alone cannot say what raised the code. That makes the 5-minute reset a test. If the washer runs normally afterward, the stop was probably a single event and the control cleared itself. If F3 E5 returns, a circuit or connection is failing again, or the outlet is not holding steady power. The only way to find out which is to test the washer on site, working from the control outward.

Likely causes of F3 E5

  • Control stop that clears with a full reset
  • Circuit or connection that fails again after the reset
  • Unsteady power at the outlet

Can you keep using the washer with F3 E5?

After one full reset, yes, if the washer runs normally. Keep an eye on it and note when the code appears if it returns, since that helps find the cause. If F3 E5 shows again, stop and avoid more resets. Check the plug and cord for damage, and keep the washer unplugged if the outlet feels hot or smells burnt.

What you can safely check

  1. Stop the washer and take the plug out of the outlet.
  2. Count out 5 minutes before plugging it back in.
  3. Close the door and start a short cycle.
  4. If F3 E5 is on the display again, stop and call us.

What our technician does for F3 E5

  • Trace the code on site from the control outward
  • Check the circuit that fails again
  • Test the outlet for steady power

How to keep F3 E5 from coming back

  • Seat the plug firmly and check the outlet is not loose
  • Avoid sharing the outlet with other heavy appliances in the laundry
  • Use a surge protector in storm season to protect the control

Technical reference

Code
F3 E5
Appliance
Whirlpool washer
Control family
Whirlpool front-load washers, Duet and WFW series
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F3 E5 questions

Is F3 E5 different from F3 E3?

They are separate codes, but the owner instruction is the same: reset the control for 5 minutes. Neither code names a part, so we test the washer to find out.

What if it works after the reset?

Then it was likely a one-time stop. Keep an eye on it, and note when it happens if it returns, because that helps us find the cause.

Why can't a phone call settle it?

The code names no part, so we have to test the control and wiring in person. You get a written price before any work begins.

Is the reset a repair?

No, the reset is a test. It shows whether the stop was a one-time event, but it does not repair a circuit that keeps failing. A repeat of F3 E5 is the sign that the washer needs to be tested.

Will F3 E5 go away by itself?

It can if the stop was brief. Once the control has been without power for 5 minutes, it may run normally again. A return of the code means the cause remains and testing is needed.

Need help with F3 E5?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair