(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Laundry Center Washer Code F 01: Power Reset Steps

F 01 on the washer section of an older Whirlpool stacked laundry center comes with a power reset and nothing else. It names no part, so a repeat after the reset needs the control checked.

Needs attention soonChecked November 2026

What does Whirlpool washer code F 01 mean?

F 01 appears on the washer section of an older Whirlpool stacked laundry center, one of the models that print error codes. The only guidance for F 01 is a power reset, and it does not point to any single part, so we treat it as a control-level condition rather than a known failure. You see F 01 and the washer will not run. A reset may clear a one-time stop, but a code that returns means the control and its connections need a look.

F 01 at a glance

Code
F 01
Appliance
Whirlpool washer
Applies to
Older Whirlpool stacked laundry center, washer section
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Control that locked up and clears with a power reset

What you may notice with F 01

  • F 01 stays on the display
  • The washer will not run any cycle
  • The code returns soon after a reset
  • Nothing is leaking, smoking or giving off a smell

How the washer detects F 01

The washer control runs the cycle and monitors itself while it does. When it meets a condition it cannot continue through, it stops and prints a code. For F 01, the guidance gives no sensor, valve or other part, only a power reset.

That tells us the code is raised at the control level. A reset removes power for 2 to 5 minutes and lets the control start from a clean state, which clears a one-time lockup. If the same condition arises again, the reset has only hidden it for a while, and the cause lies in the control, a connection to it or the power reaching it. Because the display does not say which, a technician has to look at the control and its wiring directly.

Likely causes of F 01

  • Control that locked up and clears with a power reset
  • Control or wiring condition that returns after the reset
  • Power supply at the outlet or cord connection

Can you keep using the washer with F 01?

Try one reset. If the washer runs well afterward, it is fine to keep using. If F 01 returns, stop and do not keep switching the power on and off, since that does not help and tells us nothing new. Check the cord and plug for damage, and if anything looks burned or hot, leave the washer unplugged until it is inspected.

What you can safely check

  1. Stop the cycle and unplug the washer; do not open any panel.
  2. Leave it unplugged for 2 to 5 minutes so the machine can reset.
  3. Plug it back in firmly and start a short cycle.
  4. If the code returns, do not keep cycling the power.
  5. Note when F 01 appears and call us.

What our technician does for F 01

  • Test the control and its connections
  • Check whether the code returns at once or at a certain stage
  • Check the outlet and cord for a power problem

How to keep F 01 from coming back

  • Plug the unit in firmly and check the cord for damage now and then
  • Do not share the outlet with other heavy appliances
  • Note when the code appears so a technician can see the pattern

Technical reference

Code
F 01
Appliance
Whirlpool washer
Control family
Older Whirlpool stacked laundry center, washer section
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F 01 questions

What does F 01 mean?

It is a control-level code on older laundry center washers that names no particular part. Unplugging the unit for 2 to 5 minutes is the one thing to try; after that it needs a look.

Can I reset it more than once?

One careful reset is reasonable. If F 01 comes straight back, repeated resets will not help, and we should inspect the control and its connections instead.

Should I replace the machine?

Not before an inspection. A power reset costs nothing, and many older units keep running for years. We give you a written price and say plainly if repairing a unit this age is not worth it.

Will F 01 clear by itself?

Only if it was a one-time stop. A power reset of 2 to 5 minutes may clear it, but if the same condition is still there the code returns, and the control needs to be checked.

What should I pass along about F 01?

Tell us it is a stacked laundry center showing F 01, what the washer was doing when it stopped and whether the reset changed anything. That helps us start with the right tests.

Need help with F 01?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair