Whirlpool Front-Load Washer F3 E3: Unplug the Washer for Five Minutes
F3 E3 on a Whirlpool Duet or WFW front-load washer is a control-level stop. The only direction is to cut power for 5 minutes, and the code names no part.
What does Whirlpool washer code F3 E3 mean?
Owners of a Whirlpool front-load washer in the Duet and WFW series, such as the WFW5620HW, WFW9150WW or WFW90HEFW, may find F3 E3 on the display with the cycle stopped. Current and older generations show it the same way. The one thing the instructions offer is a reset of the control by cutting power for 5 minutes. They name no sensor, valve or other part, so we treat F3 E3 as a control-level stop and not as a verdict on a part.
F3 E3 at a glance
- Code
- F3 E3
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool front-load washers, Duet and WFW series
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Control that stopped and recovers after a reset
What you may notice with F3 E3
- F3 E3 appears and the cycle stops
- The display names no part or cause
- The washer carries on after a reset, or does not
- The code may return soon after restarting
How the washer detects F3 E3
The control in a Duet or WFW washer steps through the cycle and watches for conditions it cannot continue through. When it meets one, it stops the washer and shows a code. F3 E3 is one of those stops, and the instruction given is a 5-minute power reset.
The instruction does not name a sensor, a valve or any other part. That is why we describe F3 E3 as a control-level stop rather than blame a part. A reset only separates a one-time stop from a repeat: if the washer runs normally afterward, the stop was brief, and if F3 E3 returns, something persistent is behind it. That may be the control, its wiring or power that does not hold steady at the plug or outlet, and testing is what finds out which.
Likely causes of F3 E3
- Control that stopped and recovers after a reset
- Control or wiring condition that comes back
- Plug or outlet that does not hold steady power
Can you keep using the washer with F3 E3?
After one 5-minute reset, yes, if the washer runs normally. A short test cycle with a light load is a fair check. If F3 E3 shows again, stop and let a technician test the control instead of running more cycles. Check the plug and cord for damage, and keep the washer unplugged if you notice heat or a burning smell.
What you can safely check
- Stop the washer and unplug it; leave it for 5 minutes.
- Plug it back in firmly and make sure it sits all the way in the outlet.
- Close the door, choose a cycle and start.
- If F3 E3 reappears, stop there and call us so the control can be tested rather than reset again and again.
What our technician does for F3 E3
- Test the control and its connections on site
- Check the wiring around the control
- Check the plug and outlet for steady power
How to keep F3 E3 from coming back
- Push the plug fully into the outlet until it seats firmly
- Keep the cord free from damage and strain
- Use a surge protector during storm season to protect the control
Technical reference
- Code
- F3 E3
- Appliance
- Whirlpool washer
- Control family
- Whirlpool front-load washers, Duet and WFW series
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
F3 E3 questions
What does F3 E3 tell me?
Only that the control stopped the cycle. The code names no part, and the one owner step is a 5-minute power reset, after which you can try a short cycle.
Should I run an empty cycle after the reset?
A short test cycle with a light load is fine. If F3 E3 shows again, stop and let us look rather than running more cycles.
Do you work on older Duets?
Yes. They are still common in homes and we repair them. We quote first and tell you plainly if a repair is not worth the money.
Is F3 E3 the same as F3 E5?
They are separate codes with the same owner step. Both call for a 5-minute reset on a Duet or WFW washer, and neither names a part, so we find out the cause by testing the washer.
Will F3 E3 clear by itself?
It can if the stop was a one-time event. A 5-minute reset gives the control a fresh start. If the code returns, the cause is still present and the control or its connections need testing.
Need help with F3 E3?
We trace the cause in your home first and write the price down before any part is swapped.