(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Top-Load Washer Rinse Light On: Spray Rinse in Progress

A lit Rinse light on an older Whirlpool top-load HE washer is normal. It shows that the washer is in its rinse phase, which on some cycles uses a spray of water while the basket spins.

Normal status, not a failureChecked November 2026

What does Whirlpool washer code Rinse Light On mean?

On an older Whirlpool top-load HE washer from the Cabrio and WTW family, a lit Rinse light is part of normal operation. Some cycles rinse with a spray that adds water to the tub while the basket spins. Where Fabric Softener Yes is selected, you may hear sounds like the wash phase as the washer moves the load, and the motor can hum briefly to shift the basket during filling. None of it signals an error. The washer is simply working through its rinse.

Rinse Light On at a glance

Code
Rinse Light On
Appliance
Whirlpool washer
Applies to
Whirlpool Cabrio and WTW top-load HE washers
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Spray rinse adding water while the basket spins

What you may notice with Rinse Light On

  • The Rinse light lit while the basket spins
  • Water spraying or filling during the rinse
  • A short motor hum during filling
  • Sounds like the wash phase when softener is selected

How the washer detects Rinse Light On

The indicator lights on this washer follow the stage of the cycle. When the wash stage ends, the washer drains, then moves into the rinse, and the Rinse light turns on to show where it is. During a spray rinse, fresh water is added to the tub while the basket spins, which flushes soap out of the clothes without filling the tub fully.

The washer works from its water level sensing and drain to move between stages. If Fabric Softener Yes is chosen on a model that offers it, the washer adds a few extra moves, so you hear sounds like the wash phase. The motor may hum for a moment to shift the basket during filling. Because all of this is normal, the light matters only if it stays on while nothing moves for a long time.

Why Rinse Light On appears

  • Spray rinse adding water while the basket spins
  • Fabric Softener setting adding extra motion during the rinse
  • Normal brief motor hum while filling

Can you keep using the washer with Rinse Light On?

Yes, a lit Rinse light is a normal sign, so keep using the washer. Let the rinse phase finish and avoid opening the lid while the basket is moving. If your clothes still feel soapy, run a Rinse & Spin cycle afterward. Stop using the washer only if the light stays on and nothing moves for a long time, since the fill path or drain may be stuck.

What you can safely check

  1. Keep your hands away from the basket and lid while it turns, and switch the washer off and unplug it if you ever need to open it mid-rinse.
  2. Otherwise let the rinse phase finish on its own.
  3. Avoid opening the lid while the basket is moving.
  4. If clothes stay soapy, run a Rinse & Spin cycle afterward.
  5. If the light stays on and nothing moves for a long time, call us.

What our technician does for Rinse Light On

  • Check the water level sensing
  • Test the fill path
  • Test the drain so the rinse can end

How to keep Rinse Light On from coming back

  • Use only HE detergent and measure carefully so the rinse has less soap to clear
  • Leave the lid closed during the rinse so the washer does not pause
  • Keep both faucets open and the drain hose free so each stage can end
  • Run Rinse & Spin when a bulky load comes out soapy

Technical reference

Code
Rinse Light On
Appliance
Whirlpool washer
Control family
Whirlpool Cabrio and WTW top-load HE washers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Rinse Light On questions

Is a lit Rinse light a warning?

No. It shows the washer is in its rinse phase, which on some cycles sprays water onto the spinning basket. When the light goes out, that phase is done.

Why does the washer sound like it is washing during the rinse?

With Fabric Softener Yes selected on some models, the washer tumbles the load while it adds softener. The brief hum is the motor shifting the basket as water enters.

What if the Rinse light never goes out?

Then something is holding the cycle, such as water not filling or not draining. Check the faucets and drain hose, and have the level sensing and drain tested if it persists.

Does the Rinse light mean the washer is stuck?

Not by itself. The light stays on for the whole rinse phase, which can run for a while on some cycles. It is a worry only if nothing moves for a long time, because that points to the fill, drain or level sensing.

Will the Rinse light turn off by itself?

Yes. When the rinse phase is done, the washer moves on to the spin and the light goes out. If it stays lit with no water movement and no basket turning, the cycle is being held and the washer needs a check.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair