Whirlpool ES40R123-45D repair
Electric tank water heater. Service for this model across Tampa Bay.

- Model
- ES40R123-45D
- Type
- Electric tank water heater
- Brand
- Whirlpool
About the ES40R123-45D
Two heating elements, adjustable thermostats and a temperature and pressure relief valve are in the ES40R123-45D, an electric storage water heater sold under the Whirlpool name. It is the kind of tank installed in a utility closet or garage.
When the reset button keeps tripping, the elements are measured and the thermostats and wiring checked, since a shorted element or a loose connection can both cause it. A tank giving lukewarm water gets the lower element and thermostat tested. Moisture is traced to the element gasket, drain valve, relief valve or tank itself, because each calls for a very different repair. The thermostat bracket can loosen, leaving the sensor away from the tank wall, so contact is checked first.
What we check on a ES40R123-45D visit
- Elements, thermostats and wiring when the reset button trips
- Thermostat bracket and contact with the tank wall
- Element gasket, drain valve and relief valve for the source of moisture
Key features
- Electric storage water heater
- Two heating elements
- Adjustable thermostats
- Temperature and pressure relief valve
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Other Whirlpool water heater models
Water HeaterBFG1F4034T3NOVShort gas storage water heater
Water HeaterBFG1H5040T3NOVAtmospheric vent gas water heater
Water HeaterE2F40RD045Dual element electric water heater
Water HeaterES40R92-45DLegacy electric water heater
Water HeaterES50R123-45DLarge electric storage water heater
Water HeaterE2F50HD045V Electric Water HeaterDual element electric water heater
Water HeaterFG1H5040T3NOV Gas Water HeaterAtmospheric vent gas water heater
Water HeaterE2F40RD045V Electric Water HeaterDual element electric water heaterES40R123-45D questions
The reset button on my ES40R123-45D keeps tripping. Why?
A shorted element, a thermostat that fails to open or a loose wire. The elements and thermostats are measured before anything is replaced.
Water drips from the drain valve after I flushed the tank. Is that normal?
Not normally. Sediment can hold the valve slightly open. It is cleared and the valve replaced if it still leaks, a simple repair.