Whirlpool Older Smoothtop Cooktop F25: Supply to the Cooktop
F25 on an older Whirlpool smoothtop cooktop in the WCE55US6HS family indicates trouble with the electricity feeding it. If a reset does not hold, a qualified electrician should check the circuit.
What does Whirlpool cooktop code F25 mean?
Trouble with the electricity feeding the cooktop is what F25 reports on an older radiant (smoothtop) Whirlpool cooktop such as model WCE55US6HS. The control is not getting from the feed what it expects. We repair this older model and say plainly when repairing it is not worth the money. Should a power reset fail to hold and F25 return, the published advice is to bring in a qualified electrician.
F25 at a glance
- Code
- F25
- Appliance
- Whirlpool cooktop
- Applies to
- Older Whirlpool radiant smoothtops, e.g. model WCE55US6HS
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Weak, uneven or interrupted power reaching the cooktop
What you may notice with F25
- F25 appears and heating stops at once.
- Other appliances on the same circuit may act oddly.
- Cycling the breaker may clear the code for a while.
- The code comes back when the supply misbehaves again.
How the cooktop detects F25
An electric radiant cooktop draws a lot of power through its own feed. The control at the heart of the cooktop checks what arrives and compares it with what it expects before it lets the burners run. F25 is displayed when the supply to the cooktop does not look right: weak, uneven or interrupted.
The cause can sit upstream of the appliance, in the house circuit feeding it, or inside the cooktop, in a loose joint of its feed or in the circuit that reads the supply. A reset restarts the control and can settle a brief disturbance. When F25 returns after the reset, the supply is still not behaving, and the question becomes which side owns the problem. That is why the first checks look at what reaches the cooktop and how the cooktop responds to it.
Likely causes of F25
- Weak, uneven or interrupted power reaching the cooktop
- A loose joint in the cooktop's own feed
- A control circuit that misreads the supply
Can you keep using the cooktop with F25?
Do not use the cooktop while F25 remains. A weak or unsteady supply can make the controls behave unpredictably over a hot surface. If a reset clears the code and the cooktop works normally, use it carefully and watch for a repeat. If F25 returns, leave the cooktop off, and ask a qualified electrician to inspect the circuit.
What you can safely check
- Turn every surface control off and walk to the breaker.
- Leave it off for a minute, then restore it.
- Keep watching the display for a full minute.
- Should F25 reappear, stop using the cooktop.
- Ask a qualified electrician to inspect the circuit, and call us about the cooktop.
What our technician does for F25
- Examine what reaches the cooktop and the connections it relies on
- Tell you plainly when the house circuit is the cause and an electrician must correct it
- Give the price in writing first
How to keep F25 from coming back
- Notice whether lights dim or other appliances act strangely when the cooktop runs.
- Do not open electrical panels or touch the cooktop's feed yourself.
- Mention storm-related power surges, since Florida storms can leave a feed unsteady.
Technical reference
- Code
- F25
- Appliance
- Whirlpool cooktop
- Control family
- Older Whirlpool radiant smoothtops, e.g. model WCE55US6HS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool cooktop error codes
F25 questions
Why would you suggest an electrician for F25?
The power feeding the cooktop sits outside the appliance, and F25 can originate there. Problems in the house wiring are an electrician's job and not ours.
Is it all right to cook while F25 shows?
Better not. An unsteady feed should be resolved before the cooktop is used again, since the controls may behave unpredictably. Keep it off until the supply has been checked.
How do you separate the cooktop from the house?
By measuring what arrives at the cooktop and watching how the cooktop reacts. The result shows which side needs the repair, and wiring in the house goes to an electrician.
Could my own house wiring be the problem?
It could. F25 may originate in the supply, outside the appliance. If the wiring in the house is responsible, that fix belongs to an electrician, and we say so.
Why does a reset sometimes work?
Restarting the control can clear a brief disturbance in the supply. If the supply is genuinely weak or interrupted, the reset only hides the problem for a while, and F25 returns.
Need help with F25?
We trace the cause in your home first and write the price down before any part is swapped.