(813) 565-3059 Book a Repair
Whirlpool dryer error code

Whirlpool Dryer Bottom Filter Issues: Symbol for a Blocked or Loose Filter

The bottom filter symbol on a Whirlpool WED or WGD dryer means the filter is blocked by lint or is not seated correctly. Cleaning it and seating it fully takes a few minutes at home.

Maintenance reminderChecked November 2026

What does Whirlpool dryer code Bottom Filter Issues mean?

Some Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, show a bottom filter symbol on the display. It appears for two reasons: the bottom filter is blocked by lint, or it is not positioned correctly in its compartment. You may notice the symbol and longer drying times. It is a maintenance indicator and not a control failure, so the fix takes a few minutes at home.

Bottom Filter Issues at a glance

Code
Bottom Filter Issues
Appliance
Whirlpool dryer
Applies to
Whirlpool WED and WGD dryers with a bottom filter
Type
Maintenance reminder
Can you clear it yourself?
Usually, once the care step is done
Most likely cause
Bottom filter loaded with lint

What you may notice with Bottom Filter Issues

  • A bottom filter symbol on the display
  • Clothes that take longer to dry now
  • Lint packed into the filter when you open the flap
  • A filter that sits crooked or a flap that will not close

How the dryer detects Bottom Filter Issues

Some of these dryers have a second filter in the bottom, in addition to the one at the door, which catches lint before it travels deeper into the dryer. The dryer checks that this filter is in place and that air can pass through it. The symbol on the display reports when it cannot confirm either.

Two plain situations cause it. Lint can load the filter so air no longer flows through it, which slows drying. Or the filter may not sit properly in its compartment, with the release levers not in the vertical position or the flap not fully closed. Neither is a control failure, so cleaning the filter and seating it fully clears the symbol. If the symbol stays after that, the sensing or the compartment is the next thing to look at.

Why Bottom Filter Issues appears

  • Bottom filter loaded with lint
  • Filter not pushed fully into its compartment
  • Release levers not in the vertical position
  • Flap not fully closed over the filter

Can you keep using the dryer with Bottom Filter Issues?

Yes, you can keep using the dryer once the bottom filter is clean and seated. Do not run it with the filter missing or sitting loose, since lint can then travel deeper into the dryer and block airflow. If the symbol remains with a clean, seated filter, have the sensing and compartment inspected.

What you can safely check

  1. Stop the dryer, unplug it or switch off its breaker, and let the drum cool before you open the flap.
  2. Take out the bottom filter and clean it.
  3. Push the bottom filter in until it is seated and move the release levers into a vertical position.
  4. Close the flap.
  5. Check the owner's manual if you are unsure how the filter comes out, and call us if the symbol stays on.

What our technician does for Bottom Filter Issues

  • Inspect the filter compartment
  • Test the sensing behind the symbol
  • Check the airflow path past the filter

How to keep Bottom Filter Issues from coming back

  • Clean the bottom filter at regular intervals and after any heavy lint load
  • Push the filter in fully and set the release levers vertical each time
  • Close the flap completely before starting a cycle
  • Clean the door lint screen every load so less lint reaches the bottom filter

Technical reference

Code
Bottom Filter Issues
Appliance
Whirlpool dryer
Control family
Whirlpool WED and WGD dryers with a bottom filter
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Bottom Filter Issues questions

What does the bottom filter symbol mean?

Either the bottom filter is clogged with lint or it is not seated correctly. Cleaning it and pushing it in fully, with the levers vertical, resolves most cases.

Where are the release levers?

They are part of the bottom filter compartment. After inserting the filter, move them into the vertical position, then close the flap. Your owner's manual shows the layout for your model.

The symbol is still on. What next?

If the filter is clean and seated and the symbol remains, the sensing or the compartment may need attention. It can be inspected and a written price given.

Should I worry if the bottom filter symbol comes on?

No. It is a maintenance indicator that tells you the filter needs cleaning or seating. The usual cure is a few minutes with the filter at home. Only a symbol that stays on after that points to the sensing or the compartment.

Can I run the dryer without the bottom filter?

It is better not to. The filter keeps lint from traveling deeper into the dryer. Running without it, or with it loose, lets lint build up where you cannot reach and can slow drying and strain the dryer.

Something else going on with your dryer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair