Whirlpool Dryer Door Filter (Lint Screen) Symbol: Blocked or Out of Place
The door filter symbol on a Whirlpool WED or WGD dryer means the lint screen in the door opening is blocked or not seated correctly. Cleaning and reseating it is worth doing right away.
What does Whirlpool dryer code Door Filter (Lint Screen) mean?
On Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, a door filter symbol means the lint screen in the door opening is blocked by lint or is not positioned properly. A screen clogged with lint adds drying time. Running the dryer with the screen loose, damaged, blocked or missing can cause overheating and damage to the dryer and your fabrics, so it deserves a fix right away.
Door Filter (Lint Screen) at a glance
- Code
- Door Filter (Lint Screen)
- Appliance
- Whirlpool dryer
- Applies to
- Whirlpool WED and WGD dryers with a lint screen in the door opening
- Type
- Maintenance reminder
- Can you clear it yourself?
- Usually, once the care step is done
- Most likely cause
- Lint screen covered with lint
What you may notice with Door Filter (Lint Screen)
- The door filter symbol lit on the display
- Longer drying times than you normally see
- Lint packed on the screen or around its compartment
- A screen that sits loose or crooked
How the dryer detects Door Filter (Lint Screen)
Every load of laundry sheds lint, and the lint screen in the door opening is the first catch. The dryer checks that the screen is in place and that air can pass through it. When the screen is blocked or not seated properly, the door filter symbol lights to report it.
A screen covered with lint restricts airflow, so heat and moisture stay inside and drying takes longer. A screen that is loose, damaged or missing lets lint into the housing and the vent, and the dryer can overheat, damaging both the dryer and your fabrics. That is why this symbol deserves attention right away. After the screen is cleaned dry and pushed in firmly, the symbol should clear. If it stays on, the sensing or the housing needs a look.
Why Door Filter (Lint Screen) appears
- Lint screen covered with lint
- Screen not pushed fully into its compartment
- Screen damaged or missing
- Lint that has slipped past the screen into the housing
Can you keep using the dryer with Door Filter (Lint Screen)?
Clean the screen and seat it firmly before the next load. Do not run the dryer with the screen loose, damaged, blocked or missing, because that can cause overheating and damage to the dryer and your fabrics. If the symbol stays on with a clean, seated screen, stop using the dryer until the sensing and housing have been inspected.
What you can safely check
- Stop the dryer and switch off its breaker, then let the drum cool before you put a hand inside.
- Pull the lint screen straight up and roll the lint off with your fingers.
- Do not rinse or wash the screen, because wet lint is hard to remove.
- Push the screen firmly back into place and check that it sits in the compartment correctly.
- Never run the dryer with the screen loose, damaged, blocked or missing, and call us if the symbol stays on.
What our technician does for Door Filter (Lint Screen)
- Inspect the screen compartment and housing
- Remove lint that slipped past the screen
- Test the sensing behind the symbol
How to keep Door Filter (Lint Screen) from coming back
- Clean the lint screen after every load by rolling the lint off dry
- Never wash the screen with water, since wet lint clings and clogs it
- Push the screen firmly into its compartment each time
- Replace a damaged screen right away instead of running the dryer without it
Technical reference
- Code
- Door Filter (Lint Screen)
- Appliance
- Whirlpool dryer
- Control family
- Whirlpool WED and WGD dryers with a lint screen in the door opening
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dryer error codes
Door Filter (Lint Screen) questions
How often should I clean the lint screen?
Clean it every load. The screen sits in the door opening, and a screen clogged with lint adds drying time and strains the dryer. Pull it straight up and roll the lint off with your fingers.
Can I wash the lint screen with water?
No. Wet lint is hard to remove from the screen, so roll it off dry with your fingers. Only put the screen back once it is clean and dry.
The symbol is still on with a clean screen. Why?
Make sure the screen is pushed in fully. If it is, the sensing or the compartment may need attention, and it can be inspected and a price quoted in writing.
Can a blocked lint screen cause the dryer to overheat?
Yes. A screen clogged with lint adds drying time, and running the dryer with it loose, damaged, blocked or missing can cause overheating and damage to the dryer and your fabrics. Clean it and seat it before the next load.
Will the symbol go away after I clean the screen?
It should once the screen is clean, dry and pushed in firmly. If the symbol stays, the screen may not be seated all the way, or lint may have reached the housing, and the dryer should be inspected.
Something else going on with your dryer?
We trace the cause in your home first and write the price down before any part is swapped.