Whirlpool Dryer AF Code: Check Vent Light and Airflow
AF on a Whirlpool WED or WGD dryer ties to the Check Vent light. The dryer found low airflow at the start of a cycle, so clean the lint screen and look for a blocked or crushed vent.
What does Whirlpool dryer code AF mean?
AF on Whirlpool electric and gas dryers in the WED and WGD series, including Cabrio and Duet generations, ties to the Check Vent indicator found on certain models with automatic cycles. During the sensing phase at the start of a cycle, the dryer watches airflow through itself and the vent system, and the light comes on if the vent is blocked or airflow is low. The dryer keeps running, but drying slows. The light clears at the end of the cycle, when you touch Power, or when you open the door.
AF at a glance
- Code
- AF
- Appliance
- Whirlpool dryer
- Applies to
- Whirlpool WED and WGD dryers with a Check Vent light
- Type
- Maintenance reminder
- Can you clear it yourself?
- Usually, once the care step is done
- Most likely cause
- Lint screen packed with lint
What you may notice with AF
- The Check Vent light lit early in a cycle
- Clothes that stay damp or take longer to dry
- A hot dryer cabinet or hot laundry room
- Lint around the outside vent hood
How the dryer detects AF
At the start of an automatic cycle, the dryer goes through a sensing phase. In that phase it measures how freely air moves through the dryer and out through the vent system. Good airflow carries moist air away and lets the clothes dry. Poor airflow keeps the heat and moisture inside.
If the dryer finds the vent blocked or the airflow low, it turns on the Check Vent light. The dryer does not stop. It keeps running, but drying takes longer and the dryer works harder. The light clears when the cycle ends, when you touch Power or when you open the door, and it returns on the next cycle if the cause remains. A packed lint screen, a crushed duct behind the dryer, lint in the vent run or a stuck outside flap are the likely causes.
Why AF appears
- Lint screen packed with lint
- Crushed or kinked vent duct behind the dryer
- Lint buildup in the vent run or outside hood
- Outside vent flap stuck shut
Can you keep using the dryer with AF?
The dryer will keep running, but poor airflow slows drying and strains the dryer, and trapped heat is a concern. Clean the lint screen and check the vent hose and outside flap before the next load. If the light stays on after that, stop running long cycles and have the vent path inspected.
What you can safely check
- Stop the dryer, unplug it or switch off its breaker, and let the drum cool before you reach in.
- Clean the lint screen by pulling it straight up and rolling the lint off with your fingers.
- Check that the vent hose behind the dryer is not crushed or kinked.
- Go outside and make sure the vent hood flap opens and is free of lint.
- Run the cycle again, and call us if the light stays on during a cycle after these checks.
What our technician does for AF
- Measure airflow through the vent path
- Inspect the duct run for crushing and buildup
- Check the outside hood and flap
- Give a written price before any cleaning or repair
How to keep AF from coming back
- Clean the lint screen before or after every load
- Keep the vent hose behind the dryer straight and not crushed when you push the dryer back
- Have the vent run and outside hood cleared of lint on a regular basis
- Check that the outside flap opens freely, since storms and debris can jam it
Technical reference
- Code
- AF
- Appliance
- Whirlpool dryer
- Control family
- Whirlpool WED and WGD dryers with a Check Vent light
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool dryer error codes
AF questions
Can I keep using the dryer with the Check Vent light on?
The dryer keeps running, but poor airflow slows drying and strains it. Clear the lint screen and vent first. A light that stays on after that deserves a vent inspection.
How do I clear the AF light?
It clears when the cycle ends, when you touch Power, or when you open the door. It will light again next cycle if the blockage is still there.
Do you clean dryer vents?
We check the vent path as part of diagnosing airflow. Tell us the run length and where the vent exits, and we will explain what we find and quote in writing.
Is AF the same as a clogged vent?
AF is the dryer's way of reporting low airflow, and a clogged vent is the most direct cause. Lint in the screen, a crushed hose or a stuck outside flap can all produce it, so the whole path from the dryer to the outside is worth checking.
Why does the light go out and come back?
It clears at the end of the cycle, when you touch Power or when you open the door. If the blockage is still there, the dryer senses low airflow again during the next cycle and lights it once more.
Something else going on with your dryer?
We trace the cause in your home first and write the price down before any part is swapped.