Whirlpool Microwave E13 Code: Oven Did Not Preheat Correctly
E13 tells you a Whirlpool over-the-range microwave did not preheat correctly. The control board or its wiring may be behind it, and the cooking program stops.
What does Whirlpool microwave code E13 mean?
A Whirlpool over-the-range microwave such as the WMH31017HS, WMH32519HZ or WMH53521HZ shows E13 when the oven fails to preheat as intended. Guidance points toward the appliance control board or the wiring tied to it. The code appears after a cycle meant to bring the oven up to heat, and the cooking program ends. Since it concerns the start of heating, food may come out cool.
E13 at a glance
- Code
- E13
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool over-the-range microwaves, model WMH53521HZ
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A control board output that does not start the heat as it should
What you may notice with E13
- E13 appears in the display after a preheat or heating cycle.
- The cooking program stops before the food is hot.
- Food comes out cool even though the cycle ran.
How the microwave detects E13
When a program asks the oven to preheat, the control board switches the heating circuit on and expects the oven to start warming up. It watches for that to happen. If the oven fails to preheat correctly, the control concludes that something between the board and the heat has broken down.
E13 is the control's report of that conclusion. The guidance names the appliance control board itself and the wiring connected to it. A board that does not send the right output, or a connector that has loosened on the way to the heating circuit, would both produce the same outcome. The control stops the cooking program and shows E13 because continuing without a proper start-up would leave you with food that stays cool.
Likely causes of E13
- A control board output that does not start the heat as it should
- Wiring and connectors leading to the board
- The heating path that is supposed to bring the oven up to temperature
Can you keep using the microwave with E13?
After a reset with no repeat of E13, you can use the microwave while watching how it heats. Should E13 appear on your next preheat as well, the cause is clearly still there, so stop using the oven. Switch off the breaker straight away if you smell burning or see smoke. Cool food is also a reason to stop and not keep restarting.
What you can safely check
- Stop the program; with smoke or a burning smell, cut power at the breaker and keep the door shut.
- Keep the breaker off for a full minute, then switch it on.
- Keep your eyes on the display for a minute; E13 should be gone.
- Check that nothing is blocking the vents above or below the microwave.
- Start a short preheat or cycle to see the oven behave normally. If E13 returns, call us.
What our technician does for E13
- Test the control board and the heating circuit
- Check the wiring and connectors to the board
- Confirm the repair by running a preheat
How to keep E13 from coming back
- Keep the vents above and below the microwave clear so air moves freely around it.
- Do not store items on top of the unit, where they can cover the vent openings.
Technical reference
- Code
- E13
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool over-the-range microwaves, model WMH53521HZ
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show E13
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
E13 questions
Why does E13 stop the cooking program?
The oven was supposed to start warming and never did, so the control ended the program instead of heating blindly. Guidance names the control board or its wiring, and testing confirms which.
Should I be worried about safety with E13?
The oven stopped on its own, so the code is no emergency in itself. Smoke or a burning smell is different: switch off the breaker, keep the door shut and stop using it.
Could blocked vents lead to E13?
Blocked vents are worth ruling out, so clear them. The guidance, however, names the control board and its wiring rather than airflow, so a return of E13 means testing.
Does E13 mean the same as a slow-preheat code?
No. E13 reports a preheat that did not happen correctly, while a code about running out of time is a separate finding. Each one is tested against its own facts.
Will E13 return if I restart the preheat?
If the cause is still present, yes. A reset can clear a one-time glitch, but when the same condition repeats, E13 comes back on the next preheat and points to a lasting problem.
Need help with E13?
We trace the cause in your home first and write the price down before any part is swapped.
