(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Drawer Code F4 E4: Humidity Sensor and Board

Whirlpool built-in microwaves and drawers display F4 E4 when the humidity sensor, the microwave appliance manager board or the wiring between them gives the control trouble.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F4 E4 mean?

Whirlpool built-in microwaves and drawers, WMC50522AS for example, display F4 E4 when the control finds trouble in the microwave humidity sensor, the appliance manager that runs the microwave side, or their wiring. During automatic cooking, the humidity sensor lets the microwave track moisture. The guidance offers a power reset and singles out no part, so F4 E4 helps us choose which circuit to test.

F4 E4 at a glance

Code
F4 E4
Appliance
Whirlpool microwave
Applies to
Whirlpool built-in microwave humidity sensor, WMC50522AS
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Humidity sensor on the microwave side

What you may notice with F4 E4

  • The oven shows F4 E4 in place of its normal readout
  • The microwave does not run as usual while the code is up
  • Sensor-based cooking programs may be unavailable

How the microwave detects F4 E4

Automatic cooking programs depend on knowing how much moisture is leaving the food. On a built-in microwave a humidity sensor picks that up, and the microwave appliance manager board interprets the signal.

The two are joined by a wiring harness, and the board expects a believable reading from the sensor at all times. When the sensor, the harness or the board's input produces something it cannot accept, the control shows F4 E4 and stops the oven from running as usual. The display gives no hint about which of the three is responsible. Restoring power after a short pause lets both boards start fresh and reread the circuit. If the circuit is healthy, the code clears. If not, F4 E4 returns, which tells us each link must be tested.

Likely causes of F4 E4

  • Humidity sensor on the microwave side
  • Appliance manager board reading that sensor
  • Harness and plugs linking the two

Can you keep using the microwave with F4 E4?

Not while the code is showing. The control may refuse to run the microwave, and Whirlpool does not say what the oven does with this code up. One breaker reset is a fair try. If the display clears and a short cycle works, you can carry on using it. If F4 E4 returns, leave the microwave unused until the humidity sensor circuit has been tested.

What you can safely check

  1. Empty the microwave and switch its breaker off.
  2. Count out sixty seconds, then restore power.
  3. Watch the display for F4 E4 over the following minute.
  4. With a clear display, a short cycle is a fair test.
  5. If F4 E4 appears again, stop using the oven and call us.

What our technician does for F4 E4

  • Read the humidity sensor circuit
  • Test the board that interprets the reading
  • Check the harness between them before replacing anything

How to keep F4 E4 from coming back

  • Cover dishes loosely so heavy steam does not condense around the sensor area.
  • Wipe moisture out of the cavity after steamy cooking, with the oven cool and switched off.

Technical reference

Code
F4 E4
Appliance
Whirlpool microwave
Control family
Whirlpool built-in microwave humidity sensor, WMC50522AS
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F4 E4 questions

What does the humidity sensor do in a microwave?

It senses moisture rising from food so automatic cooking programs can adjust. F4 E4 tells us that sensor, the board behind it or the wiring joining them is not working properly.

Will the microwave still heat with F4 E4 showing?

Whirlpool does not say. The code concerns a sensor circuit, yet the control may refuse to operate, so avoid using the oven if the code comes back after the reset.

Is this the same as F4E4 on an over-the-range microwave?

No. Without a space, F4E4 on over-the-range models names the humidity thermistor, a different part in a different layout. The spaced code on this page belongs to built-in units and drawers.

Does F4 E4 mean the humidity sensor must be replaced?

Not yet. The code names the sensor, the board and the wiring, and none is declared failed. A test shows which one the control is really complaining about, so a part is replaced only when it proves to be the cause.

Can steam from cooking set off F4 E4?

Whirlpool lists no such cause. Letting the cavity cool and dry before the breaker reset costs nothing, but a code that returns afterward points back to the circuit itself.

Need help with F4 E4?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair