Whirlpool Over-the-Range Microwave E21: Open Thermal Sensor Circuit
On a Whirlpool over-the-range microwave, E21 means the thermal sensor circuit looks open to the control board. The sensor, the board or the wires linking them could be the cause.
What does Whirlpool microwave code E21 mean?
E21 is displayed by Whirlpool over-the-range microwaves, including the WMH31017HS, WMH32519HZ and WMH53521HZ, when the control finds the thermal sensor circuit open. Put plainly, there is a break somewhere along the path that carries the temperature reading to the board. The sensor, the control board and the wires linking them are all candidates. The oven may refuse to start, or halt part way through a cycle.
E21 at a glance
- Code
- E21
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool over-the-range microwaves, thermal sensor circuit
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A thermal sensor that no longer passes its reading
What you may notice with E21
- E21 takes over the display of the microwave.
- The oven may not start a cycle at all.
- A cycle may stop in the middle.
How the microwave detects E21
The thermal sensor tells the control how hot the oven is. Its reading reaches the board over wiring: a small current passes out through the sensor and back, and the board turns the result into a temperature. That path has to be unbroken from end to end.
E21 means the board checked the path and found a gap, as though a wire had been cut or a connector had let go. The gap could be in the sensor, in the wiring and its connectors, or at the board's input. With no temperature reading the control cannot protect the oven or manage heating, so it will not start, or stops the cycle partway through, and shows the code.
Likely causes of E21
- A thermal sensor that no longer passes its reading
- A wire or connector with a break in it
- The control board input that reads the thermal sensor
Can you keep using the microwave with E21?
A brief reset may clear E21, and if the oven then runs normally you can try a short cycle. If the code comes back, stop using the microwave. The thermal sensor is part of how the oven protects itself from heat, so running without a reliable reading is a risk not worth taking. Switch off the breaker if you smell burning.
What you can safely check
- Stop the cycle; if you smell burning, flip the breaker off with the door still shut.
- Keep the microwave's breaker off for a minute, then restore it.
- Watch the display for a minute to make sure E21 stays clear.
- Run a short test cycle.
- If E21 comes back, stop using the oven and call us.
What our technician does for E21
- Test the circuit to tell a loose connector from a failed sensor
- Check the board input for the thermal sensor
- Watch whether the reading changes as the oven warms up
How to keep E21 from coming back
- Leave breathing room around the unit so heat does not build up near the sensor wiring.
- Do not hang heavy items from the microwave or pull on it, which can strain connectors.
Technical reference
- Code
- E21
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool over-the-range microwaves, thermal sensor circuit
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show E21
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
E21 questions
What does it mean for the thermal sensor circuit to be open?
The reading cannot travel from the sensor to the control, as though a wire had been cut. A sensor, a connector or the board may be the cause.
How does E21 compare with E22?
E21 is the open-circuit condition and E22 is the shorted one in the same thermal sensor wiring. They point to the same area, so the circuit is tested for both.
Does a reset help with E21?
It may wipe a brief glitch. A returning E21 shows a lasting problem in the circuit, which then needs testing.
Can a loose connector produce E21?
Yes. A loose connector breaks the sensor loop just as a failed sensor would, and the control reads both as an open circuit. Only a test of the circuit tells the two apart.
Why might E21 appear only when the oven warms up?
A reading that opens up as the oven heats points to a connection that moves with temperature. The code shows only when the break occurs, so it may seem to come and go.
Need help with E21?
We trace the cause in your home first and write the price down before any part is swapped.
