Whirlpool Microwave E22 Code: Thermal Sensor Circuit Shorted
E22 on a Whirlpool over-the-range microwave means the thermal sensor circuit reported a short to the control board. The sensor, the board or the wiring may be involved.
What does Whirlpool microwave code E22 mean?
E22 is the code a Whirlpool over-the-range microwave, say a WMH31017HS, WMH32519HZ or WMH53521HZ, displays when its thermal sensor circuit reads as shorted. E21 describes a break, while E22 describes the opposite: a reading that drops away as though two wires were touching. The sensor, the control board or the wiring could be involved. In the display you see E22, and the oven may refuse to start or end a cycle early.
E22 at a glance
- Code
- E22
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool over-the-range microwave models such as WMH31017HS
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A thermal sensor that has failed
What you may notice with E22
- E22 appears in the display of the microwave.
- The oven refuses to start, or a cycle is shut down.
- The code may clear after a reset and then come back.
How the microwave detects E22
Oven temperature is read through the thermal sensor circuit. The control sends a tiny signal through the sensor and its wiring, and the value that returns converts into a temperature. A sensible, steady value is what it expects.
With E22 the value collapsed, as though the two sides of the circuit had touched. E21 is the opposite case, a broken path. A shorted reading can originate in the sensor, in wiring that is pinched or rubbing on metal, or at the board's input. The control cannot tell whether the oven is hot or cold when it sees this, so it does not carry on: the cycle is shut down or not started, and the display shows E22.
Likely causes of E22
- A thermal sensor that has failed
- Wiring that is pinched or touching metal
- A control board input that reads the sensor wrongly
Can you keep using the microwave with E22?
If E22 returns, do not keep running the microwave. The thermal sensor is one of the ways the oven protects itself from overheating, and a shorted reading means that protection cannot be trusted. Switch off the breaker if you notice a burning smell, and leave the oven off until the circuit has been tested.
What you can safely check
- Stop the cycle; with a scorched smell or smoke, turn off the microwave's breaker and leave the door closed.
- Leave the breaker off about a minute, then switch it on.
- Check the display over the next minute for E22.
- Try a brief cycle.
- A returning code means the oven stays off until we test it; call us.
What our technician does for E22
- Test the thermal sensor reading
- Trace the wiring path for pinching or contact with metal
- Check the control board after the sensor and harness
How to keep E22 from coming back
- Keep the vents clear so the oven does not run hot around the sensor wiring.
- Avoid pushing the microwave against the wall or shifting it, which can pinch wiring behind it.
Technical reference
- Code
- E22
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool over-the-range microwave models such as WMH31017HS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show E22
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
E22 questions
What is a shorted thermal sensor circuit?
The control is reading the circuit as though its two sides were touching. A sensor, damaged wiring or the control board may be responsible, and a circuit test is how they are told apart.
Is it wise to keep running the microwave with E22?
Not if the code returns. The thermal sensor is one of the ways the oven guards against overheating, so the circuit should be tested before the microwave goes back into use.
Why might E22 clear and then come back?
A short can appear and disappear with vibration or heat, so the circuit may read normally for a while. A cleared code is not proof the cause is gone.
How is E22 different from E21?
E21 is an open thermal sensor circuit, a gap in the path, and E22 is a short in the same circuit. Both point to the same area, so the same sensor, wiring and board are tested.
Should I mention a burning smell about E22?
Yes. Tell us about any burning smell, since pinched or touching wiring can overheat. Switch off the breaker and keep the oven off until the circuit has been checked.
Need help with E22?
We trace the cause in your home first and write the price down before any part is swapped.
