Whirlpool OTR Microwave Error F9: Two Circuit Boards to Check
F9 on a Whirlpool over-the-range microwave means a requested function was not carried out, and two boards, the main control and the relay board, plus the wires between them, are suspects.
What does Whirlpool microwave code F9 mean?
Over-the-range models such as the Whirlpool WMH31017HS, WMH32519HZ and WMH53521HZ show F9 when the oven did not carry out what was requested. Behind the message are two boards and the harness that joins them: one makes decisions, the other switches the loads. A button press leads nowhere while F9 is displayed. The message marks a pair of boards to examine. Neither is confirmed bad.
F9 at a glance
- Code
- F9
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool OTR microwave, control and relay boards
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- The main control board that takes keypad requests
What you may notice with F9
- Pressing a pad leads nowhere and F9 appears
- The display reads F9 where the clock normally shows
- Loads such as the heating do not switch on
How the microwave detects F9
Two boards share the work in these over-the-range microwaves. One takes your request from the keypad and decides what should happen. The other does the switching, turning loads such as the heating system and fan on and off when the first board asks.
The boards talk through a wiring harness. F9 appears when a request did not make it all the way through. The main control may have failed to issue it, the relay board may not have acted, or the harness between them may have lost the signal. The display shows only the end result, and a reset clears nothing if the cause is a real failure. Testing both boards and the connection is how the break is located.
Likely causes of F9
- The main control board that takes keypad requests
- The relay board that switches the heating and fan loads
- The harness joining those two boards
Can you keep using the microwave with F9?
If a breaker reset clears F9 and the microwave works when you repeat the failed function, you can keep using it while watching for a return. If the code comes back, stop and leave it off. Because the relay board switches the loads, a failure there can leave a function running or stopping at the wrong moment, and that is a risk above a cooktop.
What you can safely check
- Turn the microwave's circuit breaker off and keep every panel closed.
- Count off a full minute, then switch power on.
- Spend a minute near the unit and see if F9 shows itself again.
- With a clean screen, retry the function that failed before.
- If F9 shows again, stop using the microwave and ring us.
What our technician does for F9
- Test the control board and the relay board
- Compare what the relay board sends with what the control requests
- Confirm the cause before any board is ordered
How to keep F9 from coming back
- Wipe the keypad dry after cooking so steam and grease stay out of the control area.
- Reset the breaker once after a power outage and check the display before starting a cycle.
Technical reference
- Code
- F9
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool OTR microwave, control and relay boards
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show F9
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
F9 questions
What does a relay board do inside a microwave?
It switches the loads, such as heating and the fan, on and off whenever the main control asks. F9 tells us the request did not complete somewhere between the two boards.
Does F9Q carry the same meaning as F9?
No, they differ. F9Q gives only a power reset as guidance, while F9 names two boards, so we test both of those circuits.
Should I replace the microwave because of F9?
Wait for a diagnosis first. Harness and board problems can sometimes be repaired, and we say frankly when a replacement is the wiser purchase.
Can F9 clear without a repair?
If a power glitch triggered it, a breaker reset can remove the code. When F9 comes back, one of the boards or the harness is still the problem, and a reset cannot repair any of those.
Why test both boards?
The guidance lists the two boards and their harness without singling one out. Testing all three avoids replacing an expensive board that was not the cause.
Need help with F9?
We trace the cause in your home first and write the price down before any part is swapped.
