(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range Showing 1C1C: Keypad and Keypad Wiring Problem

On Whirlpool freestanding and slide-in ranges, 1C1C points to the keypad, or the wiring that serves it. The oven control is receiving a poor signal from the pad.

Needs attention soonChecked November 2026

What does Whirlpool range code 1c1c mean?

Ranges from Whirlpool in the freestanding and slide-in styles, for example the WFE515S0ES or WFG525S0HV, show 1C1C when the keypad or its wiring is the trouble spot. The oven control is getting a poor signal from the pad. The display shows 1C1C, and the oven may ignore presses or end a cycle. On many ranges the cooktop runs on a separate circuit.

1c1c at a glance

Code
1c1c
Appliance
Whirlpool range
Applies to
Whirlpool freestanding and slide-in ranges, gas or electric
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The user interface or keypad

What you may notice with 1c1c

  • 1C1C shows on the range display
  • The oven ignores some or all keypad presses
  • The oven may stop a cycle that was running
  • No message says which part is responsible

How the range detects 1c1c

The keypad on the range is the user interface: every press on it travels through a harness and connectors to the oven control. The control expects a clean, steady signal from the pad. When the signal is poor or missing, the control reports it with 1C1C.

That is why the code points to the keypad or its wiring and not to the oven's heating parts. A worn pad or a loose connector can both interrupt the signal, and the display does not say which. On many ranges the cooktop is a separate circuit, so the burners may be unaffected, though that cannot be promised for a given model. The breaker reset clears a one-time glitch; if 1C1C returns, the pad response and the harness behind it are tested before a part is suggested.

Likely causes of 1c1c

  • The user interface or keypad
  • The harness and plugs running from the keypad to the control

Can you keep using the range with 1c1c?

Run a single breaker reset and a short bake first. If 1C1C stays away and the oven responds, keep using it. A returning code means the oven should rest until it has been looked at, because the control cannot rely on your presses. The burners may run separately, but that cannot be promised for your range. On a gas range, a gas smell means leave the house at once and call the gas utility from outside.

What you can safely check

  1. Switch the range's breaker to off, wait a full minute, and keep your hands off the range while you wait.
  2. Turn the breaker back on.
  3. Keep the display in view for a minute to see if 1C1C comes back.
  4. Run a brief bake as a response test.
  5. On a gas model, a gas smell means you should go outside right away, without touching switches, and phone the gas utility or 911 from there.

What our technician does for 1c1c

  • Test how the keypad responds to presses.
  • Test the harness and connectors behind the keypad.
  • Decide whether the pad or the wiring needs attention before suggesting a part.

How to keep 1c1c from coming back

  • Wipe the keypad with a lightly damp cloth, and keep liquids from running behind the pad.
  • Avoid pressing hard on or prying at the keypad edges, since loose connectors behind it are what the code points to.

Technical reference

Code
1c1c
Appliance
Whirlpool range
Control family
Whirlpool freestanding and slide-in ranges, gas or electric
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1c1c questions

Does 1C1C mean the oven control has died?

Not necessarily. 1C1C names the keypad or its wiring, so we test those first; replacing a pad costs less than replacing a control. The breaker reset costs nothing, so try it first.

Will the burners still work while 1C1C shows?

Many ranges run the burners on separate circuits, but we cannot promise that for yours. If anything else seems wrong, stop using the range and have it inspected.

Is an older range worth repairing with 1C1C?

Frequently the rest of the range is sound, so a keypad repair can make sense. If a repair is not worth it, we say so honestly, and the price of the part matters more than age alone.

Is 1C1C the same as the other 1C codes?

No. Each code is a separate report, so we note exactly which one your display shows. The first checks may look alike, yet the findings can differ from one code to the next.

Will 1C1C clear by itself?

A one-time glitch can clear after the breaker reset. If 1C1C comes back, the keypad or its wiring has a lasting problem that testing will locate.

Need help with 1c1c?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair