Whirlpool Range ES or E5: Energy Save Display Sleep
ES followed by On on a Whirlpool range means the Energy Save feature is active, so the display sleeps when the range sits idle. A key press or opening the oven door wakes it.
What does Whirlpool range code ES or E5 mean?
Energy Save is a power-saving feature on some Whirlpool ranges, freestanding and slide-in, among them the WFE515S0ES and WFG525S0HV. The display shows ES followed by On when it is active, and then the control and clock rest when the range has been left alone and only the time of day is shown. Roughly five minutes after the last use, the display flashes ES and On twice and goes blank. A tap on Bake, Broil or another control key, or opening the oven door, brings it back.
ES or E5 at a glance
- Code
- ES or E5
- Appliance
- Whirlpool range
- Applies to
- Whirlpool Energy Save display sleep on ranges like the WFE515S0ES
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Energy Save switched on from the clock key
What you may notice with ES or E5
- ES and On appear twice on the display
- The display goes blank when the range sits idle
- A key press or the oven door wakes the display
- The control beeped after a long press on the clock key
How the range detects ES or E5
Many ranges show only the time of day when nothing is cooking, and a lit display draws a little power around the clock. Energy Save cuts that by letting the control and clock rest during idle periods. About five minutes after the last use, ES and On appear twice, and then the screen goes dark.
Nothing is broken when that happens. The control works as designed and returns to life when you tap a key like Bake or Broil or swing the oven door open. The feature is switched on by keeping the clock key pressed for ten seconds until the control beeps, so a long press while wiping the panel can start it by accident. Your owner's manual explains how to turn it off if you prefer a lit display.
Why ES or E5 appears
- Energy Save switched on from the clock key
- A display built to wake when a key is pressed or the door is opened
- A keypad that fails to wake the display
Can you keep using the range with ES or E5?
Yes, without any concern. ES and On describe a power-saving feature, not a problem. The range cooks normally, and the display returns as soon as you press a key or open the door. If you would rather have the display stay lit, the owner's manual shows how to turn Energy Save off for your model.
What you can safely check
- Confirm that nothing is cooking and the oven is cool, then touch a control key, Bake or Broil for example, or open the oven door; the display should wake.
- If you would like the display to stay lit, look up the Energy Save entry in your model's owner's manual.
- The feature starts when the clock key is held for ten seconds until the control beeps, so a long press may have switched it on.
- When the display stays dark after a key press, flip the range's breaker off for a minute and then on.
- If it still refuses to wake, we can test the keypad and control.
What our technician does for ES or E5
- Confirm the range is only asleep before looking for a part
- Test the keypad if the display never wakes
- Check the control if the keypad tests clean
How to keep ES or E5 from coming back
- Avoid holding the clock key while wiping the control panel, since a long press can start Energy Save.
- Keep the owner's manual handy so you can turn the feature on or off when you like.
Technical reference
- Code
- ES or E5
- Appliance
- Whirlpool range
- Control family
- Whirlpool Energy Save display sleep on ranges like the WFE515S0ES
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool range error codes
ES or E5 questions
What makes the display go dark by itself?
With Energy Save active, the display sleeps once the range has idled for about five minutes showing nothing but the time. That saves power and is no cause for concern. Press any key or open the door and it wakes.
Do ES and E5 mean the same thing?
The guidance lists both for this screen, and it is the ES wording that explains Energy Save. If your screen shows anything else, tell us exactly what it says.
How do I switch Energy Save off?
Your manual lists the keys for the model, and we avoid guessing at them. Should the steps fail or the display remain dark, the keypad and control can be tested.
Is Energy Save a sign something is wrong with the range?
No. It is a feature that saves power while the range is idle. The oven and cooktop work as normal, and the display wakes when you press a key or open the door.
What if the display never wakes up?
If a key press, the door and a one-minute breaker reset do nothing, the keypad or control may need testing. Tell us exactly what the display shows, or that it stays blank.
Something else going on with your range?
We trace the cause in your home first and write the price down before any part is swapped.