(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool LOC on the Display: Control Lock Is Switched On

When LOC appears on a Whirlpool range or wall oven, the control lock is active, so the keypad is shut down on purpose. It is a setting you can undo, not damage.

Normal status, not a failureChecked November 2026

What does Whirlpool range code LOC mean?

When LOC shows, the oven is telling you its control lock is engaged, not that a part has broken. On freestanding and slide-in Whirlpool ranges like the WFE515S0ES or WFG525S0HV, the lock deactivates the keypad and latches the oven door so nobody starts it by mistake, and LOC flashes up whenever you press a key while the lock is on. Wall ovens built into the cabinet, the WOS51EC0HS and WOC54EC7HS among them, apply the lock for the same purpose. It ships set to unlocked, and you cannot turn it on while the oven is running.

LOC at a glance

Code
LOC
Appliance
Whirlpool range
Applies to
Whirlpool ranges and wall ovens with a control lock
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Control lock turned on, deliberately or by accident

What you may notice with LOC

  • LOC appears on the display when you press a pad
  • The oven door stays latched although no cycle is running
  • Keypad presses are ignored until the lock is released
  • A single tone sounds when the unlock press works

How the range detects LOC

The control lock is a deliberate setting, not a sensor reading. When it is on, the control stops accepting presses from the keypad and holds the oven door latched, so a child or a stray elbow cannot start a cycle. Any pad you press while the lock is active makes the display show LOC as a reminder rather than an alarm.

Because the lock exists to prevent unintended use, the control refuses to engage it while the oven is running, and it comes preset to unlocked. On a range, a press of Start/Enter held for 5 seconds is the unlock step, which is why a long accidental press can toggle the lock without you noticing. Wall ovens apply the same lock, with unlock steps in the owner's manual that differ by model.

Why LOC appears

  • Control lock turned on, deliberately or by accident
  • Start/Enter pressed long enough on a range to engage the lock
  • Oven still running, so the lock cannot yet be turned on or off

Can you keep using the range with LOC?

Yes. LOC is a setting, so nothing is wrong with the oven. Unlock the controls the way your manual describes, then cook as normal. If the door stays latched and the unlock steps do nothing, do not force it; leave the oven switched off and let it sit. Forcing a latched door can damage the latch.

What you can safely check

  1. Confirm nothing is cooking and that the oven and the timer are both off.
  2. On a range, press and keep your finger on Start/Enter for 5 seconds.
  3. A single tone should sound, and LOC should leave the display.
  4. On a wall oven, use the unlock steps printed in your owner's manual.
  5. Pick an ordinary oven setting to see that the controls respond again.
  6. If LOC stays after the unlock steps, call us.

What our technician does for LOC

  • Test the keypad and the door lock when LOC stays on after the unlock steps
  • Check how the control answers each pad
  • Show you the unlock sequence that fits your exact model

How to keep LOC from coming back

  • Keep the oven and timer off while cleaning the panel, and avoid long presses on Start/Enter.
  • Turn the lock on only when you want it, and note the unlock steps for your model.
  • Wipe the keypad with a barely damp cloth so wet streaks do not mimic presses.

Technical reference

Code
LOC
Appliance
Whirlpool range
Control family
Whirlpool ranges and wall ovens with a control lock
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

LOC questions

Why does LOC appear when I press a key?

That is the lock doing its job. While it is active, any key press brings up LOC and the oven door stays latched. Unlock the controls first, then pick your setting.

Can I switch the lock on while the oven is cooking?

No. The lock cannot be turned on while the oven is running, so finish or cancel the cycle first. It is preset to unlocked, so it only engages when someone switches it on.

Is a latched door with LOC a sign of a broken lock?

Not by itself, because the lock latches the door on purpose along with disabling the pads. If the unlock steps do nothing, the keypad or door lock may not be answering, and that is the time to ask us.

Does LOC clear by itself?

It stays on until you unlock it from the controls. Nothing times it out, so a locked oven that seems dead only needs the unlock steps for its model, which your owner's manual shows.

What should I tell you if LOC will not go away?

Say which oven you have, what you tried, and whether a tone sounded when you pressed the unlock key. That helps us judge whether the pad or the door lock is not answering.

Something else going on with your range?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair