(813) 565-3059 Book a Repair
Whirlpool range error code

Whirlpool Range PUSH or PSH: The Oven Is Waiting for Start

PUSH, or PSH on a shorter display, means you chose an oven function on a Whirlpool range but did not press Start. It is a reminder, not a failure.

Normal status, not a failureChecked November 2026

What does Whirlpool range code PUSH or PSH mean?

A Whirlpool range, freestanding or slide-in, like the WFE515S0ES or WFG525S0HV, shows PUSH, or PSH on a shorter display, after you select an oven function without pressing Start. Start begins every oven function. Leave it for 5 seconds and the prompt appears. Leave it for 1 minute after your last keypad press and the function is dropped, and the display returns to the time of day. It is a reminder, not a failure.

PUSH or PSH at a glance

Code
PUSH or PSH
Appliance
Whirlpool range
Applies to
Whirlpool ranges that prompt for the Start pad
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Start not pressed after choosing a function

What you may notice with PUSH or PSH

  • PUSH or PSH shows on the display after you pick a function
  • The oven is not heating although a function is selected
  • The display goes back to the time of day after a minute
  • Pressing Start does nothing when the prompt will not clear

How the range detects PUSH or PSH

Every oven function on the range waits for a deliberate start. After you choose a function, the control holds your choice and expects the Start pad to be pressed. If 5 seconds pass without it, the display prompts with PUSH, or PSH on displays with fewer characters, to remind you.

The control does not wait forever. When a full minute goes by after your last keypad press, it cancels the function and puts the time of day back on the display. That is why a half-set oven can return to the clock without ever heating. Nothing has failed; the control is simply guarding against unintended heating. Only a prompt that stays after a firm Start press suggests the pad is not registering.

Why PUSH or PSH appears

  • Start not pressed after choosing a function
  • Function canceled after a minute of waiting
  • Start pad not responding when pressed

Can you keep using the range with PUSH or PSH?

Yes. PUSH or PSH is only asking for Start, so the oven is fine to use. Choose the function again, press Start within 5 seconds, and confirm the oven begins to heat. If the prompt stays after a firm press of Start and a breaker reset, stop trying to cook with it until the Start pad has been tested.

What you can safely check

  1. Check that the oven is off or cool and that no pan is left inside before choosing a function.
  2. Choose the function again.
  3. Press Start within 5 seconds.
  4. Watch whether the oven begins to heat.
  5. If PUSH or PSH returns after you press Start firmly, shut the range off at its breaker for one minute, then back on.
  6. Wait a minute and confirm operation, and call us if the pad still does nothing.

What our technician does for PUSH or PSH

  • Check how the Start pad is wired into the control and test its response
  • Check whether the pad registers a firm press
  • Replace the pad or connection once testing shows it is not answering

How to keep PUSH or PSH from coming back

  • Press Start promptly after choosing a function so the prompt never needs to appear.
  • Press Start firmly and squarely rather than with the edge of a fingertip.
  • Keep the keypad clean and dry so the Start pad registers every press.

Technical reference

Code
PUSH or PSH
Appliance
Whirlpool range
Control family
Whirlpool ranges that prompt for the Start pad
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

PUSH or PSH questions

Why is my oven saying PUSH?

The oven wants a Start press. Once a function is selected, you have 5 seconds to press Start before the prompt appears, and after a minute with no press the function cancels.

Do PUSH and PSH mean the same thing?

Yes. PSH is the short form for displays with fewer characters, and either one is a request for the Start pad. Should Start seem dead, reset power at the breaker and let us know.

What happens if I wait too long after choosing a function?

After 1 minute without another keypad press, the function is canceled and the display returns to the time of day. Choose the function again and press Start promptly.

Will PUSH clear by itself?

It clears when you press Start, or when a minute passes after your last keypad press and the function cancels. The time of day then returns. A prompt that persists after a firm Start press needs testing.

What should I tell you if Start does nothing?

Say which function you chose, whether PUSH or PSH appeared, and whether a breaker reset changed anything. That helps us see whether the pad registers a press and whether its link to the control holds.

Something else going on with your range?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair