Whirlpool Range Code FEE6: Bake Element Circuit Problem
FEE6 on a Whirlpool range concerns the bake element in the main cavity or the wiring feeding it, and the guidance offers a breaker reset only. Heating may be weak or absent.
What does Whirlpool range code FEE6 mean?
On gas or electric Whirlpool ranges, freestanding or slide-in, like the WFE515S0ES and WFG525S0HV, FEE6 concerns the bake element in the main oven cavity and the wiring that feeds it. Owners are given one step, a power reset at the breaker. Put another way, the oven's bottom heating circuit is reporting trouble. Expect the code on the display and an oven that heats poorly or not at all until it clears.
FEE6 at a glance
- Code
- FEE6
- Appliance
- Whirlpool range
- Applies to
- Whirlpool gas and electric ranges, main oven cavity
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Bake element circuit in the main cavity
What you may notice with FEE6
- FEE6 shows up on the oven display
- The oven heats slowly or not at all
- Baked food comes out underdone or barely cooked
- The code returns after a restart
How the range detects FEE6
At the bottom of the main oven cavity sits the bake element, the heat source used for baking. The control powers it through a circuit of wiring and connectors and watches that circuit while the oven heats. If the element does not respond as expected, or the wiring serving it is interrupted, the control reports FEE6 and may stop heating.
The guidance names the bake element and its wiring and offers a power reset as the single owner step. It does not separate a failed element from a loose connector or a control that is not sending the right output. A reset only shows whether FEE6 was a one-off reading. Because the element and its leads carry line voltage and become very hot, the circuit is never something an owner should touch, which is why the owner checks stop at observation.
Likely causes of FEE6
- Bake element circuit in the main cavity
- Wire or connector feeding the element
- Control board output driving the bake circuit
Can you keep using the range with FEE6?
If FEE6 clears and the oven heats normally, baking is reasonable. If it returns, stop using the oven, because the bottom heating circuit is reporting trouble and may be failing. Do not touch the element or any wiring behind panels. On a gas model, if you smell gas, get out and call the gas utility from a safe place outside.
What you can safely check
- Switch the oven off and wait until it is completely cool; the element and its wiring are hot and live.
- Switch the range's breaker off for one minute.
- Switch it on again.
- Watch the oven for a minute to see whether FEE6 returns.
- Set an ordinary bake to confirm the oven works.
- If the code returns, do not keep using the oven; call us.
What our technician does for FEE6
- Test the bake circuit in order: element, wiring and the control output
- Check the element connections for burned or loose contacts
- Replace the failing part and quote it in writing first
How to keep FEE6 from coming back
- Keep foil and spills off the oven floor so they do not reach the bake element area.
- Avoid scraping or striking the element when you clean the cavity.
- Mention slow preheating early, before the code appears.
Technical reference
- Code
- FEE6
- Appliance
- Whirlpool range
- Control family
- Whirlpool gas and electric ranges, main oven cavity
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool range error codes
FEE6 questions
What does FEE6 tell me about my range?
It points to the bake element in the main oven cavity or its wiring. A reset is the one published owner step, and a return of the code means that circuit gets tested.
Is baking still reasonable with FEE6?
If the code clears after a reset and stays gone, normal use is fine. If it returns, stop baking. On a gas range, if you catch a gas smell, get out and call the utility from a safe distance.
Do you work on older ranges showing FEE6?
Yes. Age alone does not rule out a repair, and you get a straight answer when a repair is not worthwhile.
Will FEE6 clear after a reset?
It may if the reading was a one-off. If it returns, the element, its wiring or the control output is reporting a problem again, and the circuit needs testing before any heating is trusted.
How is this code different from the broil element code?
This one relates to the bake element at the bottom of the oven, while the broil element code relates to the top. Each has its own circuit, so the code tells us which one to test.
Need help with FEE6?
We trace the cause in your home first and write the price down before any part is swapped.