Whirlpool Range FEE7 Code: Broil Element Circuit Check
FEE7 on a Whirlpool range is tied to the broil element in the main oven cavity and its wiring, the heat source at the top. A breaker reset is the only owner step.
What does Whirlpool range code FEE7 mean?
Whirlpool ranges, freestanding or slide-in and gas or electric, among them the WFE525S0HS and WFG515S0ES, can display FEE7 for the broil element in the main oven cavity and its wiring. That element supplies heat from the top of the cavity. Owners are offered one thing, a power reset at the breaker, with no further cause named. While FEE7 is showing, broiling and other modes relying on top heat may not work.
FEE7 at a glance
- Code
- FEE7
- Appliance
- Whirlpool range
- Applies to
- Whirlpool gas and electric ranges, main oven cavity
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Broil element circuit in the main cavity
What you may notice with FEE7
- FEE7 shows up on the oven display
- Broiling does not start, or the top element stays dark
- Modes that need top heat do not work
- The code comes back after a restart
How the range detects FEE7
The broil element stretches across the top of the main oven cavity and supplies intense heat from above. The control switches it on for broiling and for any cooking mode that draws on top heat, and it watches the circuit that feeds the element. If the circuit does not respond as the control expects, the control posts FEE7 and may stop the mode.
The guidance lists only the element and its wiring. It does not distinguish between an element that has burned out, a connector that has loosened at the top of the cavity, and a control output that is not driving the circuit. After a power reset, the control checks again, which tells us only whether the message was a one-off. Line voltage runs through the element and its leads, so an owner's role stops at watching the display.
Likely causes of FEE7
- Broil element circuit in the main cavity
- Loose or damaged lead at the top element
- Output from the control board to the broil circuit
Can you keep using the range with FEE7?
If FEE7 clears and the oven broils and bakes normally, you can carry on. If it returns, stop using the oven, since the circuit at the top of the cavity is reporting a problem. Do not open panels or touch the element or its leads. If a gas model ever smells of gas, step outside and phone the gas company from there.
What you can safely check
- Switch the oven off and wait until it is completely cool; the top element and its leads are live and hot.
- Switch the range's breaker off and leave it off for one minute.
- Switch it on again.
- Watch the oven for a minute for FEE7.
- Try a short, ordinary oven setting to verify operation.
- Should FEE7 return, stop using the oven and tell us.
What our technician does for FEE7
- Test the top-heat circuit in sequence, from the element to the control output
- Inspect the connector at the top element for heat damage
- Replace whichever part fails, after you have approved the written price
How to keep FEE7 from coming back
- Keep grease splatter from building up under the broil element by wiping the cavity when cool.
- Do not place pans so close to the top element that food or foil touches it.
- Tell us early if broiling seems weaker than before.
Technical reference
- Code
- FEE7
- Appliance
- Whirlpool range
- Control family
- Whirlpool gas and electric ranges, main oven cavity
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool range error codes
FEE7 questions
Which part does FEE7 concern?
The broil element in the main cavity, or the wiring serving it. Owners get only a reset; if FEE7 repeats, the parts of that circuit are tested one at a time.
Why did broiling stop?
Because the broil element supplies the top heat, a problem in its circuit can stop any mode that depends on it. Baking from below may behave differently, so note which modes still work.
Can older ranges with FEE7 be repaired?
Yes. A repair on an aging range is weighed against its remaining life, and you hear it straight when it is not the best use of money.
Will FEE7 go away by itself?
A reset may clear a one-off reading. If the code returns, the broil element, its wiring or the control output has a continuing problem, and the top-heat circuit needs testing.
Can I still bake while FEE7 shows?
The guidance does not say. Baking uses the bottom element, but a code that keeps appearing is a reason to stop using the oven until it is checked, so tell us what still works.
Need help with FEE7?
We trace the cause in your home first and write the price down before any part is swapped.