Whirlpool Undercounter Refrigerator CL or LO: Why It Reads Too Cold
When a Whirlpool undercounter refrigerator or beverage center shows CL or LO, the display is reading an interior temperature that is too low. A door left ajar, a fresh warm load or an outage can cause it.
What does Whirlpool refrigerator code CL or LO mean?
A CL or LO reading tells you the unit thinks its interior is colder than the setting allows. It appears on Whirlpool undercounter refrigerators and beverage centers. Before assuming something has broken, work through four everyday situations. Was the door shut all the way, or left open for a long stretch? Did you just load a lot of warm or room-temperature bottles and food? Did the power go out recently? Any of these can throw the reading off, and the unit needs a little time to level out afterward.
CL or LO at a glance
- Code
- CL or LO
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool undercounter refrigerators and beverage centers
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- Door ajar or held open long enough to disturb the reading
What you may notice with CL or LO
- CL or LO shows on the display instead of a temperature
- The door was recently open, or warm items went in
- The unit lost power in the last day or so
- Cooling feels normal even while the display reads low
How the refrigerator detects CL or LO
An undercounter refrigerator or beverage center watches its interior with a temperature sensor and compares the reading with the setting you chose. When the number falls below what the control accepts, the display shows CL or LO in place of a temperature.
The tricky part is that the sensor reports what it feels, not why. A door that was left open lets room air in, a big load of warm bottles changes the readings as it cools, and a power outage restarts the control partway through a cycle. Each one can make the display read low for a while without any broken part. That is why the guidance starts with the door, the load and the power history, and asks you to give the unit time to stabilize before deciding that the sensing itself is wrong.
Likely causes of CL or LO
- Door ajar or held open long enough to disturb the reading
- Big batch of warm items added at once
- Outage that left the sensing out of step
- Temperature reading wrong after a power reset
Can you keep using the refrigerator with CL or LO?
You can keep using it while you run the simple checks. A low reading is not a safety hazard in itself. Watch that the contents are cold but not freezing, and confirm with a thermometer if you store anything delicate. If the display keeps showing CL or LO after the door is shut, the load has settled and the power cycle is done, stop relying on the display and have the sensing tested.
What you can safely check
- If you decide to cut power, switch off the breaker or unplug the unit first; otherwise just leave it running and keep your hands clear of the rear.
- Push the door fully shut and clear anything pressing on the seal.
- Think back: did you restock warm items or lose power lately?
- Give the unit time to settle before judging it.
- If CL or LO remains, unplug it for one minute, plug it back in, and watch the display for one minute.
- If CL or LO comes back even though the door is shut and the contents have cooled, call us.
What our technician does for CL or LO
- Read the temperature sensing against the real interior temperature
- Test the control for a wrong reading
- Give you a written price before any repair
How to keep CL or LO from coming back
- Close the door fully after every use and make sure bottles do not press against the seal.
- Add warm items in smaller batches so the interior can keep up.
- Plug the unit into a surge protector if storms often cut the power in your area.
Technical reference
- Code
- CL or LO
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool undercounter refrigerators and beverage centers
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool refrigerator error codes
CL or LO questions
Why does my beverage center display CL or LO?
The unit believes the interior temperature is too low. Start with the door, a large restock of warm items and any recent power outage, since each can cause the reading, and let it settle.
Should I unplug the unit to clear it?
Only after the simple checks do not help. Disconnect power for one minute, restore it, then watch the display for one minute. It needs no tools, and nothing else is involved.
Is it worth repairing an older undercounter unit?
Sometimes. You receive a written price first and a 30-day workmanship warranty on the work, and if the unit is too old to justify a repair, we say so honestly.
Is CL or LO the same as the E1 code on older units?
No. CL or LO describes a temperature that reads too low, with a list of everyday causes. E1 is an older display code with only a power cycle as guidance, and it names no condition at all.
Will CL or LO go away by itself?
It can, once the door is closed, the load has cooled and the unit has had time to stabilize. If it returns even with the door shut and the contents cooled down, the sensing needs testing.
Need help with CL or LO?
We trace the cause in your home first and write the price down before any part is swapped.