Whirlpool Refrigerator TempAlarm: Light Still Flashing After the Tone Stops
TempAlarm warns that a compartment in a Whirlpool side-by-side or French-door refrigerator warmed past its limit. The tone fades by itself, while the light flashes until you press Alarm.
What does Whirlpool refrigerator code TempAlarm mean?
TempAlarm appears on Whirlpool refrigerators of the side-by-side type that have a dispenser in the door, for example the WRS325SDHZ, and on French-door models with a bottom freezer, for example the WRF535SMHZ. The control raises it once the fresh-food section climbs past 48 degrees F (9 C), while the freezer climbs past 15 degrees F (minus 9 C), and stays there for more than ninety minutes. Once temperatures recover, the tone ends by itself. The light keeps flashing until Alarm is pressed, which leaves a reminder that the event took place.
TempAlarm at a glance
- Code
- TempAlarm
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool side-by-side and French-door bottom-freezer refrigerators
- Type
- Needs attention soon
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- A door left open or held off its seal during a busy day
What you may notice with TempAlarm
- A tone sounds from the refrigerator, then stops by itself
- The indicator light keeps flashing after the sound ends
- Food or drinks feel warmer than normal
- The light stays on until Alarm is pressed
How the refrigerator detects TempAlarm
Temperature sensors inside the refrigerator section and the freezer feed readings to the control. The control compares each reading with a limit: 48 degrees F (9 C) for the refrigerator and 15 degrees F (minus 9 C) for the freezer. A short spike does not count; only a compartment that stays beyond its limit past the ninety-minute mark triggers the alert.
When that happens the control sounds a tone and starts the indicator flashing. Once temperatures recover, the tone shuts off without any action from you. The light is different on purpose: it keeps flashing until Alarm is pressed, so someone who was away during the event still learns that it happened. The alert reports that a limit was crossed, not why, which is why the cause has to be worked out from what the household did and how the compartments recover.
Likely causes of TempAlarm
- A door left open or held off its seal during a busy day
- A power interruption that let both compartments warm
- A large load of warm food added all at once
- A cooling problem when temperatures do not recover
Can you keep using the refrigerator with TempAlarm?
Yes, once temperatures are back to normal, but treat the alert as a warning that food sat warm. Close the doors, press Alarm, and read a thermometer in each compartment again later today. If either section stays above its limit, stop relying on it for perishables, move food to a cooler, and have us test it. If you see sparks, smell burning or find water around the unit, unplug it right away.
What you can safely check
- If you smell burning or see water around the refrigerator, unplug it at the outlet before touching anything.
- Close both doors fully and clear anything that props a seal open.
- Let the refrigerator run and cool back down.
- Press Alarm one time and the flashing light will stop.
- Later in the day, put a thermometer in each compartment and read it.
- If readings stay warm, move perishables to a cooler and call us.
What our technician does for TempAlarm
- Watch how both compartments recover with thermometer readings over time.
- Test the cooling system when temperatures will not come back down.
- Inspect the door seals for a gap that lets warm air in.
How to keep TempAlarm from coming back
- Avoid loading a large amount of warm food at one time; spread groceries across the day.
- Check that doors latch and that no bag or tray holds a seal open.
- After a storm outage in Florida, read a thermometer once power returns, since the alert may have sounded while you were away.
Technical reference
- Code
- TempAlarm
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool side-by-side and French-door bottom-freezer refrigerators
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool refrigerator error codes
TempAlarm questions
How long must the refrigerator stay warm before TempAlarm sounds?
The control waits until a compartment stays past its limit beyond ninety minutes, so a brief door opening should not set it off. The limits are 48 degrees F for the refrigerator and 15 degrees F for the freezer.
Do I need to press Alarm to make the light stop?
Yes. The tone ends by itself, but the light keeps flashing as a record of the event until Alarm is pressed. Pressing it repairs nothing; it only clears the reminder that an over-temperature event happened.
Should I throw out food after TempAlarm?
Do not judge by look or smell. Read a thermometer and compare it with USDA and FDA guidance on how long food may sit above 48 degrees F. If you cannot confirm how long an item stayed warm, discard it.
Will TempAlarm clear by itself?
The tone stops by itself once temperatures recover, but the flashing light stays until you press Alarm. So the sound clears on its own, and the light needs one press from you to go dark.
What readings help you judge TempAlarm?
Tell us the model, whether the alert followed an outage or a door left open, and what a thermometer reads in both compartments now. Those readings help us separate a one-time event from a cooling problem.
Need help with TempAlarm?
We trace the cause in your home first and write the price down before any part is swapped.