(813) 565-3059 Book a Repair
Whirlpool refrigerator error code

Whirlpool Undercounter Refrigerator HI or LO: Power Reset and Verify

HI or LO is a message on Whirlpool undercounter refrigerators and beverage centers. Whirlpool gives only a power reset, then a check that the unit cools normally, and names no part.

Needs attention soonChecked November 2026

What does Whirlpool refrigerator code HI or LO mean?

HI or LO can appear on Whirlpool undercounter refrigerators and beverage centers. Whirlpool's guidance is a power reset and nothing more: turn the unit off for a minute, turn it on, see whether the message returns, and confirm normal cooling. No sensor, fan or other part is named, and there is no temperature figure. So your role is to separate a one-off glitch from a real problem by watching how the unit behaves, and we deal with whatever the message points to should it come back.

HI or LO at a glance

Code
HI or LO
Appliance
Whirlpool refrigerator
Applies to
Whirlpool undercounter refrigerators and beverage centers
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The control reading the cabinet as too warm or too cold

What you may notice with HI or LO

  • HI or LO shows on the display of an undercounter unit
  • The door was recently open or warm drinks were added
  • The cabinet feels normal to the touch
  • The message returns after the reset

How the refrigerator detects HI or LO

An undercounter refrigerator or beverage center has a small control and a temperature sensor inside the cabinet. The control compares the sensor's reading with the setting you chose and shows HI or LO when the reading appears to be above or below what it should be.

The display reports the control's reading, not necessarily the true temperature in the cabinet. A door left open, a fresh load of warm bottles or a recent power interruption can all push the reading off for a while without anything being broken. A sensor circuit that gives an odd value can also produce the message even when the cabinet is at the right temperature. Whirlpool's guidance names no part, so the power reset and a thermometer check are the ways to tell a passing effect from a lasting one.

Likely causes of HI or LO

  • The control reading the cabinet as too warm or too cold
  • A temperature sensor circuit giving an odd value
  • A door left ajar or a recent load of warm drinks
  • A power interruption that left the control unsettled

Can you keep using the refrigerator with HI or LO?

You can keep using the unit while you check it. Use a thermometer in the cabinet to see whether the contents are really too warm or too cold. If the temperature is where it should be and the message clears, nothing more is needed. If the message stays, or the contents are warming, move perishables to another refrigerator and have the sensor circuit tested.

What you can safely check

  1. Make sure the door is shut, then cut power for a full minute at the breaker or the plug.
  2. Restore power.
  3. Keep an eye on the display for another minute and see whether HI or LO comes back.
  4. Use your hand and a thermometer to verify that the unit is cooling properly.
  5. If you just loaded warm drinks, give the unit time to recover first.
  6. A message that returns with a shut door and a settled load means call us.

What our technician does for HI or LO

  • Compare the display with a thermometer reading
  • Test the temperature sensor circuit
  • Quote in writing before work

How to keep HI or LO from coming back

  • Close the door fully after each use and keep bottles clear of the seal.
  • Load warm drinks in smaller batches and give the unit time to recover between loads.

Technical reference

Code
HI or LO
Appliance
Whirlpool refrigerator
Control family
Whirlpool undercounter refrigerators and beverage centers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

HI or LO questions

What is the display telling me with HI or LO?

Whirlpool describes only a power reset and gives the letters no cause. Putting a thermometer in the cabinet next to the display tells you quickly whether the unit is really off temperature.

Could warm drinks set off the message?

Yes: a fresh load of warm bottles pushes the temperature up for a spell, and so does an open door. Shut the door, give the unit time to recover, and watch whether the message clears by itself.

Do you work on undercounter units?

Yes. We test first, quote in writing, and put a 30-day workmanship warranty behind our repair. If a small unit is beyond sensible repair, we say so.

Is HI or LO the same as CL or LO on another model?

Not necessarily. Whirlpool's guidance for this display is a power reset and a cooling check, and it does not say the letters match another code. We confirm what the display means by testing your unit.

Will the message clear without a reset?

It can, once the door has been closed and the contents have settled. If it stays after a reset and a settled load, the sensor circuit or control needs to be tested.

Need help with HI or LO?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair