Whirlpool Refrigerator DoorAjar Alarm: Why It Sounds and How to Stop It
DoorAjar is the Door Ajar Alarm on Whirlpool side-by-side, bottom-freezer and French-door refrigerators. It sounds when a door or freezer drawer stays open with cooling on, and closing everything resets it.
What does Whirlpool refrigerator code DoorAjar mean?
The DoorAjar message comes from the Door Ajar Alarm. It is found on Whirlpool side-by-side refrigerators with a door dispenser (WRS588FIHZ), on bottom-freezer models (WRB322DMBM, WRB329DFBM) and on French-door bottom-freezers (WRF560SEHZ). With cooling on, a refrigerator door or freezer drawer left open for between 2 and 5 minutes, depending on the model, triggers the alarm, which then repeats at 2-minute intervals. Once every door is shut, the alarm resets. Pressing a control button quiets the sound only; the icon remains on.
DoorAjar at a glance
- Code
- DoorAjar
- Appliance
- Whirlpool refrigerator
- Applies to
- Whirlpool side-by-side, bottom-freezer and French-door refrigerators
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- A door or freezer drawer left standing open
What you may notice with DoorAjar
- A repeating beep sounds every few minutes
- A Door Ajar icon is lit on the control panel
- Touching a button quiets the sound but not the icon
- A bin or package is sticking out of a door
How the refrigerator detects DoorAjar
Each refrigerator door and freezer drawer is tied to a small door switch. When a door closes, the switch tells the control it is shut; when it opens, the control starts counting.
The limit is a count of 2 to 5 minutes that varies by model. Past it, the alarm sounds so long as cooling is on, and it repeats every 2 minutes. The delay exists so that normal loading and unloading does not set it off. Touching a button on the panel mutes the sound but does not change what the switch is reporting, so the Door Ajar icon stays lit as long as a door is open or the switch does not feel it closed. When every door seats properly and the signal returns, the alarm resets by itself. A lit icon with all doors shut points to the switch, the door's contact with it, or the wiring between them.
Why DoorAjar appears
- A door or freezer drawer left standing open
- A bin, shelf or package wedged against a door
- Door not reaching the door switch
- A worn door switch, or wiring that fails to report closed
Can you keep using the refrigerator with DoorAjar?
Yes, as long as the doors actually close. An open door lets the cold out and makes the refrigerator work harder, so close it fully and remove whatever is holding it. If the icon stays on with every door shut, the refrigerator may still cool normally, but the alarm will keep going off. Check the interior with a thermometer if the problem has lasted for hours, and do not leave a door propped to silence the beeping.
What you can safely check
- Stop what you are doing and push every door and drawer fully shut; no power needs to be switched off for this.
- Look for a bin, shelf or package pushing a door back open.
- Want it quiet while you clean? Touch any button on the panel.
- Close each door again and watch the Door Ajar icon go out.
- Note which door keeps the icon lit.
- If every door is truly shut and the icon stays on, call us.
What our technician does for DoorAjar
- Test the door switch and the signal it sends
- Check door alignment against the switch
- Inspect the wiring and quote the work in writing first
How to keep DoorAjar from coming back
- Keep door bins and shelves organized so tall bottles and boxes never stop a door from closing.
- Wipe the door gasket and the area around the door switch so a sticky film does not hold a door slightly open.
Technical reference
- Code
- DoorAjar
- Appliance
- Whirlpool refrigerator
- Control family
- Whirlpool side-by-side, bottom-freezer and French-door refrigerators
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool refrigerator error codes
DoorAjar questions
How soon does the Door Ajar alarm start?
After 2 to 5 minutes with a door or drawer open, depending on the model, as long as cooling is on. It then repeats every 2 minutes until all doors are shut.
Can I mute it while I wipe the inside?
Yes. Touch any button on the panel and the sound pauses, though the icon stays lit until every door is closed. That lets you leave a door open for cleaning without the beeping.
My older refrigerator keeps showing Door Ajar. Can it be fixed?
Yes, we look at older refrigerators. You get the price in writing first, a 30-day workmanship warranty, and a straight answer when a repair is not worth the money.
Why does the Door Ajar icon stay on after I mute the sound?
Muting only silences the alarm. The icon reports that a door or drawer is open or not sensed as closed, so it stays lit until every door seats and the switch signals closed.
Can a door that looks shut still trigger Door Ajar?
Yes. A door can sit just short of the switch, or a bin can hold it a fraction open. Push each door firmly and watch which one keeps the icon on.
Something else going on with your refrigerator?
We trace the cause in your home first and write the price down before any part is swapped.