(813) 565-3059 Book a Repair
Whirlpool refrigerator error code

Whirlpool French-Door Refrigerator F8 E3: Checking the Flashing F

Older Whirlpool French-door bottom-freezers can blink F8 E3. The guidance gives one owner step, a power cycle, and ties neither F8 nor E3 to a named part.

Needs attention soonChecked November 2026

What does Whirlpool refrigerator code F8 E3 mean?

Older Whirlpool French-door bottom-freezers (WRF535SMHZ, WRX735SDHZ, WRF560SEHZ) can display F8 E3. The panel blinks the letter F and then the characters after it. Whirlpool gives owners a single step for this blinking F, a power cycle, and does not link the F8 E3 pair to a named part. These designs keep running in plenty of kitchens, and repairing one is routine work for us. You see the blinking display, while cooling might be affected or might not.

F8 E3 at a glance

Code
F8 E3
Appliance
Whirlpool refrigerator
Applies to
older Whirlpool French-door bottom-freezer refrigerators
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
The control board unable to read one circuit

What you may notice with F8 E3

  • A blinking F and the characters F8 E3 on the display
  • Cooling may carry on exactly as it did before
  • The display settles after a power cycle
  • The code can come back hours or days later

How the refrigerator detects F8 E3

When the display blinks F8 E3, the control board is reporting on itself and on the parts it listens to. It reads signals from sensors and fans through wiring, and when one of those readings cannot be made sense of, it blinks the letter F and the pair.

The brand does not define F8 or E3, so the display is a pointer, not a diagnosis. Cutting power for sixty seconds lets the board restart and attempt every reading again. If a short power interruption left it in a stuck state, the restart cures it. If a link joining the board to a sensor or fan has worked loose over the years, or the circuit keeps returning a bad value, the blinking returns. Cooling may keep working throughout, which is why the temperature has to be checked and the circuit tested on the refrigerator itself.

Likely causes of F8 E3

  • The control board unable to read one circuit
  • A loose link from the board to a sensor or a fan
  • Cooling setting off at the control
  • A power interruption that left the board stuck

Can you keep using the refrigerator with F8 E3?

Yes, while it stays cold, and if it does not, stop. Put a thermometer in both compartments after the reset and check again later. If F8 E3 returns or the freezer softens, move perishables to a cooler and do not depend on the refrigerator. The code does not describe a hazard in the appliance, but a unit with an unexplained alert should not be trusted with a full freezer.

What you can safely check

  1. Pull the plug, or flip the breaker, and leave the refrigerator dark for sixty seconds.
  2. Plug in again or restore the breaker.
  3. Look on the panel for the cooling setting; if it is off, switch it on.
  4. Stay close to the panel for a minute and note whether F8 E3 blinks again.
  5. If so, make a note of the time and of whatever the refrigerator was doing.
  6. Then call us with those notes.

What our technician does for F8 E3

  • Read the board and test the circuit behind F8 E3
  • Check wiring between the board and any sensor or fan on it
  • Quote the work in writing before repairing

How to keep F8 E3 from coming back

  • Keep the refrigerator on a surge protector, since a brief outage can leave an older board in a stuck state.
  • Make a point of checking the cooling setting after cleaning around the display.

Technical reference

Code
F8 E3
Appliance
Whirlpool refrigerator
Control family
older Whirlpool French-door bottom-freezer refrigerators
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show F8 E3

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

F8 E3 questions

What is F8 E3 telling me?

This is a blinking F code on a French-door refrigerator. Whirlpool asks for a power cycle and service if it returns, and names no single part. Testing the refrigerator settles which circuit it is.

Is the food safe while F8 E3 shows?

Put a thermometer in each compartment. A cold refrigerator and a solid freezer suggest the food may be fine; if either side is warming, shift perishables to a cooler.

Do you work on French-door models past their warranty?

Yes. The price is put in writing first, a 30-day workmanship warranty follows the repair, and we tell you directly when fixing an older unit is poor value.

Does F8 E3 always mean the control board has failed?

No. The board may only be reporting a circuit it could not read, such as a connector or wire. The guidance names no part, so we test the circuit and the board before deciding what needs replacing.

What should I write down if F8 E3 comes back?

Note the time, whether the F flashes or stays steady, and whether the refrigerator was running, cooling or being opened. Those details help the technician narrow down where to begin testing.

Need help with F8 E3?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair