Whirlpool Washer F24: Too Much Laundry or Too Much Inlet Water
F24 with a red symbol on an older Whirlpool washer means either too much laundry for the program or too much water coming in. Handle it with care and do not leave the washer running unattended.
What does Whirlpool washer code F24 mean?
F24, with a red symbol, can mean one of two things on older Whirlpool washers where the series is not stated. First, too much laundry for a program with a small maximum load. Second, too much inlet water. Because the second can mean water entering when it should not, treat F24 with care and do not leave the washer running unattended. The washer stops and waits for you.
F24 at a glance
- Code
- F24
- Appliance
- Whirlpool washer
- Applies to
- Older Whirlpool washers with a red symbol, series not stated
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Load larger than the cycle's maximum
What you may notice with F24
- F24 appears with a red symbol
- The load looks too big for the program
- Water keeps flowing in with no cycle running
- The drum or the floor is filling with water
How the washer detects F24
F24 with a red symbol carries two possible meanings, and the washer does not tell you which. The first is simple: the load is larger than the program's small maximum, so the washer stops and waits for you to reduce it.
The second is more serious. The washer sees too much inlet water, which can mean water entering when it should not, for example through an inlet valve that does not close. That is why the first move is to close the faucet, and why the washer should not be left running unattended. Draining with the Power button for at least 3 seconds and waiting for End clears the tub. If water flows in again with no cycle running, the inlet valve needs service, and the washer should stay off.
Likely causes of F24
- Load larger than the cycle's maximum
- Water entering the washer without a cycle running
- Inlet valve or control reading that needs testing
Can you keep using the washer with F24?
Only if the cause was simply too much laundry. Remove some items, run Rinse & Spin and follow the maximum load size. If water kept entering with no cycle running, do not use the washer. Close the faucet, unplug it and leave it off until the inlet valve has been checked, because it can fill the drum or the floor.
What you can safely check
- If water is entering, close the water faucet and unplug the washer first.
- If the load is too big, take some out, select Rinse & Spin and start it to finish the interrupted cycle.
- Hold the Power button for at least 3 seconds to drain, and wait until End appears.
- Open the faucet again. If water flows in with no cycle running, close it, unplug the washer and call us.
What our technician does for F24
- Test the inlet valve
- Test the control separately
- Confirm the washer stops water when no cycle runs
How to keep F24 from coming back
- Stay within the maximum load size for each program
- Close the water faucet if you ever notice water entering at rest
- Do not leave the washer running unattended after an F24
Technical reference
- Code
- F24
- Appliance
- Whirlpool washer
- Control family
- Older Whirlpool washers with a red symbol, series not stated
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
F24 questions
How do I tell which F24 I have?
If the load was large and no extra water is entering, it was too much laundry. If water keeps running in after the drain step, the inlet is the cause and the washer should stay off.
Is it safe to run Rinse & Spin?
Yes, when the load was simply too big. Remove some items first, and follow the maximum load size in the washer's owner's manual so the next cycle does not stop again.
What if the water keeps coming in?
Close the faucet, unplug the washer and call us. Do not use it until the inlet has been checked, because it can fill the drum or the floor.
Is the red symbol important with F24?
Yes. A red symbol marks something the washer will not continue through, and with F24 it asks for care because water may be entering. Close the faucet and check which of the two meanings applies.
Will F24 clear by itself?
If the load was too big, it clears once you reduce it and restart. If water is entering without a cycle, the code will not settle on its own, and the inlet valve needs service before the washer is used.
Need help with F24?
We trace the cause in your home first and write the price down before any part is swapped.