Whirlpool Washer F20 or F60: Red Symbol, Unplug and Shut Off the Water
F20 or F60 with a red symbol on a Whirlpool washer is a firm instruction: turn the washer off and unplug it, close the water faucet and contact service. Do not keep running it.
What does Whirlpool washer code F20 or F60 mean?
Some Whirlpool washers, series not stated, show F20 or F60 together with a symbol lit in red. The instruction that goes with it is firm: turn the washer off and unplug it, close the water faucet, and contact a service representative. The display does not say which circuit or part is behind it, but a red symbol with a shut-water instruction tells us to treat it seriously. Do not keep running the washer to see whether it clears.
F20 or F60 at a glance
- Code
- F20 or F60
- Appliance
- Whirlpool washer
- Applies to
- Whirlpool washers with a red warning symbol, series not stated
- Type
- Stop using it until checked
- Can you clear it yourself?
- No, stop using it until it is checked
- Most likely cause
- Water control condition the washer treats as unsafe to continue
What you may notice with F20 or F60
- F20 or F60 appears with a red symbol lit
- The washer will not continue the cycle
- Water may be on the floor around the washer
- The faucet behind it is still open
How the washer detects F20 or F60
Most washer codes stop a cycle and wait. F20 or F60 with a red symbol goes further: the washer treats the condition as one it should not continue through, and it tells you to turn it off, unplug it and close the water faucet.
The display does not say which circuit or part is behind the code. The instruction to shut the water points toward a water control problem, such as a fill or inlet valve passing water when it should not, but the code does not confirm that. Since the washer will not tell us more, the safe course is to remove power and water first and then trace the cause with both controlled. Running another cycle to see whether the code clears would only add risk.
Likely causes of F20 or F60
- Water control condition the washer treats as unsafe to continue
- Fill or inlet valve passing water when it should not
- Control reading that needs testing before the washer is used again
Can you keep using the washer with F20 or F60?
No. A red symbol with a shut-water instruction is not something to test by running another cycle. Turn the washer off, unplug it, close the water faucets and wipe up any water. Leave it off until a technician has traced the cause with the power and water controlled. If the floor near the outlet is wet, do not touch the plug until the area is dry.
What you can safely check
- Turn the washer off and unplug it right away.
- Close the water faucets that feed it.
- Wipe up any water on the floor.
- Leave it off and call us. Do not run another cycle to see whether the code clears.
What our technician does for F20 or F60
- Trace the cause with the washer unplugged and the water shut off
- Check the fill circuit and the valves with the supply controlled
- Test the control reading
How to keep F20 or F60 from coming back
- Close the water faucets when you leave home for a long trip
- Check hoses behind the washer for drips now and then
- Respond to a red symbol at once instead of trying another cycle
Technical reference
- Code
- F20 or F60
- Appliance
- Whirlpool washer
- Control family
- Whirlpool washers with a red warning symbol, series not stated
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool washer error codes
F20 or F60 questions
Why is the symbol red?
A red symbol marks a condition the washer will not continue through. With F20 or F60 the instruction is to unplug, close the faucet and get service, so we recommend doing exactly that.
Can I try one more cycle?
No. If the condition involves water, another cycle could let more water in or damage the washer. Leave it off and let us inspect it.
What if there is water on the floor?
Keep the washer unplugged, mop up the water, and call us. If the floor is soaked near the outlet, do not touch the plug until the area is dry.
Is F60 the same as F20 here?
The guidance treats them together. Both come with the red symbol and the same instruction: turn the washer off, unplug it, close the faucet and contact service. The display does not separate them for us.
What should I say when I call?
Tell us whether the symbol was red, whether water was on the floor and which faucet you closed. Give the model label if you can find it. That helps us arrive ready to trace the water path.
Need help with F20 or F60?
We trace the cause in your home first and write the price down before any part is swapped.