(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Duet Washer Error F3 E6: A Control Stop, Reset the Power First

F3 E6 on a Whirlpool Duet or WFW front-load washer is a control-level stop with no part named. The only instruction is to cut power to the washer for 5 minutes and try again.

Needs attention soonChecked November 2026

What does Whirlpool washer code F3 E6 mean?

Duet and WFW front-load Whirlpool washers, including the WFW90HEFW and WFW5620HW, can stop with F3 E6 on the display. The instructions for this code are brief: unplug the washer for 5 minutes so the control restarts. They name no sensor, pump or valve. The same message applies to current and older generations of the line, so we treat F3 E6 as a stop at the control level and test from there instead of guessing at a part.

F3 E6 at a glance

Code
F3 E6
Appliance
Whirlpool washer
Applies to
Whirlpool Duet and WFW front-load washers
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A control that locked up and clears after a power cycle

What you may notice with F3 E6

  • The display shows F3 E6 and the washer stops before finishing
  • The cycle may halt partway or refuse to start at all
  • Water may be left sitting in the drum after the stop

How the washer detects F3 E6

A front-load washer keeps a running conversation between its main control, the door lock, the water valves, the drain pump and the motor drive. When something in that exchange stops making sense, the control halts the cycle and shows a code so it does not run blind.

For F3 E6 the instructions name no particular part. That tells us the washer noticed a problem it cannot describe in more detail, which is why the first move is only to remove power and let the control start fresh. If it starts normally and finishes a cycle, the stop was likely a one-time lockup. If the same characters return, the control is hitting the same snag again, and it has to be tested with the washer connected and running.

Likely causes of F3 E6

  • A control that locked up and clears after a power cycle
  • A control or wiring problem that comes back after the reset
  • A loose plug or a weak wall outlet feeding the washer

Can you keep using the washer with F3 E6?

You can try one reset and a short cycle, because a power cycle is safe and costs nothing. If F3 E6 comes straight back, stop using the washer until it has been tested. Running full loads with an unexplained control stop risks leaving soaked laundry in the drum and a drum of standing water. Unplug the washer if you see water leaking or smell anything hot.

What you can safely check

  1. Stop the cycle, unplug the washer from the wall and keep your hands away from the back panel.
  2. Leave it with no power and no button presses for the full 5 minutes.
  3. Plug it back in, close the door and run one short cycle.
  4. Note at which stage of the cycle the code shows, in case it returns.
  5. If F3 E6 comes back after one reset, call us instead of repeating the reset.

What our technician does for F3 E6

  • Read the washer through a cycle and watch where it stops
  • Test the main control and its wiring connections
  • Check the plug, cord and outlet for a poor supply

How to keep F3 E6 from coming back

  • Plug the washer straight into a solid wall outlet and avoid stretched cords or loose power strips
  • During Florida storm season, a surge protector on the outlet helps shield the control from power spikes

Technical reference

Code
F3 E6
Appliance
Whirlpool washer
Control family
Whirlpool Duet and WFW front-load washers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F3 E6 questions

Is one reset really enough to try?

Yes. One careful reset shows whether the code was a one-time lockup. If F3 E6 returns right away, further resets only delay the real test of the control.

Will F3 E6 harm the clothes inside?

Not the fabric itself, but wet laundry should not sit for days. Once the washer runs again, do a rinse and spin, or hang the load to dry.

What does the technician do with this code?

We read the washer, test the control and its connections, explain the result in plain words, and give you a written price before any work starts.

Is F3 E6 the same as other F3 codes?

No. Other F3 codes on Whirlpool washers point to water level, temperature or air sensors on certain platforms. F3 E6 on a Duet or WFW names nothing, so we test it on its own rather than borrowing another code's cause.

Which details help you diagnose F3 E6?

Give us the model number, such as WFW5620HW, say when in the cycle the code appeared, and tell us whether one power reset changed anything. That helps us arrive ready to test the control.

Need help with F3 E6?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair