Whirlpool GI1500XHW repair
15-inch undercounter ice maker. Service for this model across Tampa Bay.

- Model
- GI1500XHW
- Type
- 15-inch undercounter ice maker
- Brand
- Whirlpool
About the GI1500XHW
White and front-vented, the GI1500XHW is a 15-inch undercounter ice maker in the GI1500 family that drops cube ice into a storage bin. It fits between cabinets, and some units carry a letter or digit after the number, so we read the full label.
Hard water and a warm room are what such machines fight in Tampa Bay bars and outdoor kitchens. For weak or missing ice, we examine the water supply and inlet valve, then the drain, and finally the cooling side: airflow behind the front grille, the fan and the ice-making cycle. If the bin stays warm and melts its contents, that points us to the cooling parts.
What we check on a GI1500XHW visit
- Water supply and inlet valve filling the tray
- Drain line for backups into the cabinet
- Front grille airflow, fan and the ice-making cycle
Key features
- 15-inch undercounter ice maker, GI1500 family
- Cube ice into a storage bin
- Front-vented design
- White finish
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool ice maker codes
Codes listed for Whirlpool ice makers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool ice maker models
Ice MakerGI15NDXTBBlack 15-inch undercounter ice maker
Ice MakerGI15NDXXQ15-inch undercounter cube ice maker
Ice MakerGI15NDXZSStainless 15-inch undercounter ice maker
Ice MakerGI15NFLXSLeft-hinge stainless undercounter ice maker
Ice MakerGI15NFRXSRight-hinge stainless undercounter ice maker
Ice MakerWUI75X15HBBlack clear-ice undercounter ice maker
Ice MakerWUI75X15HWWhite undercounter ice maker, removable bin
Ice MakerWUI75X15HZStainless clear-ice maker with drain pumpGI1500XHW questions
My ice maker produces small cubes. What causes that?
Low water flow or a scaled line. We look at the inlet valve screen, supply pressure and tray, and clean the system when scale is responsible.
There is water in the cabinet below the bin. Where do you look?
At the drain line first, then the inlet fitting and the bin. A clogged drain or loose connector can be the source, and we quote the fix in writing.