Whirlpool WUI75X15HZ repair
Stainless clear-ice maker with drain pump. Service for this model across Tampa Bay.

- Model
- WUI75X15HZ
- Type
- Stainless clear-ice maker with drain pump
- Brand
- Whirlpool
About the WUI75X15HZ
Clear ice and a fingerprint-resistant stainless finish define the WUI75X15HZ, a 15-inch undercounter ice maker. Equipped variants carry a drain pump, which helps when no floor drain is nearby.
A pump lifts melt water to a sink line, so there are more parts to test. If water sits in the cabinet, we examine the pump, the float and the discharge hose before blaming a leak elsewhere. After that come the fill valve and the clear-ice circulation. Whether your unit has the pump is confirmed from the label and the cabinet, so we know which parts apply before we pull anything apart.
What we check on a WUI75X15HZ visit
- Drain pump, float and discharge hose
- Fill valve and fill connection leaks
- Clear-ice circulation and cloudy ice
Key features
- 15-inch undercounter ice maker
- Clear ice production
- Drain pump on equipped variants
- Fingerprint-resistant stainless finish
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool ice maker codes
Codes listed for Whirlpool ice makers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool ice maker models
Ice MakerGI1500XHW15-inch undercounter ice maker
Ice MakerGI15NDXTBBlack 15-inch undercounter ice maker
Ice MakerGI15NDXXQ15-inch undercounter cube ice maker
Ice MakerGI15NDXZSStainless 15-inch undercounter ice maker
Ice MakerGI15NFLXSLeft-hinge stainless undercounter ice maker
Ice MakerGI15NFRXSRight-hinge stainless undercounter ice maker
Ice MakerWUI75X15HBBlack clear-ice undercounter ice maker
Ice MakerWUI75X15HWWhite undercounter ice maker, removable binWUI75X15HZ questions
What is the drain pump for on this machine?
It lifts melt and cleaning water to a drain above the machine. When it fails, water collects in the cabinet, so we test the pump, float and hose.
The machine shut off by itself. Could the float be involved?
Yes. A float or sensor that senses high water can stop the machine to prevent overflow. We clear the drain path and test the float before replacing a board or pump.