(813) 565-3059 Book a Repair
Model library · Whirlpool ice maker

Whirlpool GI15NFLXS repair

Left-hinge stainless undercounter ice maker. Service for this model across Tampa Bay.

Whirlpool ice maker repair in Tampa Bay
Model
GI15NFLXS
Type
Left-hinge stainless undercounter ice maker
Brand
Whirlpool

About the GI15NFLXS

Door swings to the left on the GI15NFLXS, a stainless 15-inch undercounter ice maker that vents through the front and levels itself in place. Any ending after the number is read from the label before ordering.

The hinge side takes the wear, so we inspect the hinge, door stop and gasket there first: a door sitting a little open melts ice and fills the cabinet with moisture. Fill valve and drain follow, then the cooling parts at the front. Neighboring cabinets should leave room for the door to swing, and we check that as well.

What we check on a GI15NFLXS visit

  • Left-side hinge, door stop and gasket
  • Fill valve speed and drain
  • Front cooling fan noise

Key features

  • 15-inch undercounter ice maker with a left-hand door swing
  • Stainless finish
  • Front venting
  • Integrated leveling

The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.

Error codes

Whirlpool ice maker codes

Codes listed for Whirlpool ice makers. Which ones a unit can show depends on its control board, so we confirm by the full model number.

All error codes

FAQ

GI15NFLXS questions

The ice in my GI15NFLXS is melting. Is the door the cause?

It may be. A door sitting slightly open or a torn gasket lets warm air in. We check the seal, hinge and leveling before the cooling side.

A hum and rattle come from the front. What is it?

Likely the cooling fan or a loose grille. We clean the front area, check the fan blade and mounts, and give you a written price if the fan needs replacing.

Call Book a Repair
Call (813) 565-3059 Book a Repair