(813) 565-3059 Book a Repair
Whirlpool dryer error code

Whirlpool Dryer Codes F01 to F04: Clearing With the Power Button

F01 through F04 on a Whirlpool WED or WGD dryer can be cleared by touching and holding Power for at least 3 seconds. A code that returns means a circuit needs testing.

Needs attention soonChecked November 2026

What does Whirlpool dryer code F01 to F04 mean?

Codes from F01 through F04 appear on Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, such as the WED5000DW. The brand groups them together and gives a way to clear them without naming a part: touch and hold the Power button for at least 3 seconds while the dryer is on. You see an F0-style code in the display and a dryer that stops or will not start. A code that returns after clearing needs testing.

F01 to F04 at a glance

Code
F01 to F04
Appliance
Whirlpool dryer
Applies to
Whirlpool WED and WGD electric and gas dryers
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Control board input that has tripped a protective check

What you may notice with F01 to F04

  • A code from F01 through F04 on the display
  • A dryer that stops or will not start
  • The code clearing with the Power hold and then returning
  • A lint screen or vent that looks blocked

How the dryer detects F01 to F04

The control board in the dryer checks its sensors and circuits against expected ranges. When one of them falls outside what the board expects, a protective check trips and the board stops the cycle, showing a code from F01 through F04. Each number stands for its own circuit.

The brand groups the four codes together and gives one way to clear them without naming a part: touch and hold the Power button for at least 3 seconds while the dryer is on. That removes a passing condition. If the dryer then runs for 5 minutes without the code, the condition may have been brief. A code that comes back within minutes points to a real problem in the circuit that tripped, which has to be identified from the exact number and tested.

Likely causes of F01 to F04

  • Control board input that has tripped a protective check
  • Connections or wiring to the control
  • A passing condition that the clear step removes
  • Sensor reading outside its expected range

Can you keep using the dryer with F01 to F04?

After you clear the code with the Power hold, restart the dryer and watch it for 5 minutes. If the code stays away and the dryer runs normally, you can keep using it. If the code returns, stop and note the exact number, since a code that comes back within minutes points to a real condition and not a glitch.

What you can safely check

  1. Stop the dryer and let the drum cool, and unplug it or switch off its breaker if you are unsure of anything.
  2. With the dryer on, touch and hold the Power button for at least 3 seconds to clear the code.
  3. Restart the dryer and monitor it for 5 minutes to make sure the code does not display again.
  4. Make sure the lint screen is clean and the vent is not crushed.
  5. If the code returns, stop and call us with the exact number you saw.

What our technician does for F01 to F04

  • Note the exact code and test that circuit
  • Check the control board input and connections
  • Test the sensor reading against its range
  • Give a written price before any part

How to keep F01 to F04 from coming back

  • Keep the lint screen clean and the vent from being crushed or blocked
  • Note the exact code each time so a later visit starts with accurate information
  • Use a surge protector suited to large appliances where storms and power dips are common
  • Do not clear a returning code again and again, since it hides what the control saw

Technical reference

Code
F01 to F04
Appliance
Whirlpool dryer
Control family
Whirlpool WED and WGD electric and gas dryers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F01 to F04 questions

How do I clear an F01 to F04 code?

While the dryer is on, touch and hold the Power button for at least 3 seconds. Then restart the dryer and monitor it for 5 minutes.

The code came back after five minutes. Now what?

Then the condition is still there. Stop using the dryer and call us with the exact code, since each of the four numbers points to its own circuit.

Do F01 to F04 mean the same thing?

They are grouped for the clear step, but each number stands for its own circuit. We read the exact code at the visit, so tell us which one you saw.

Will an F01 to F04 code clear by itself?

Sometimes a passing condition goes away on its own, and the Power hold clears the display. If the same code returns within minutes or on later loads, a real condition is repeating it, and the circuit named by that number should be tested.

What should I tell you about the code?

Tell us the exact number, F01 through F04, the dryer model and whether the code returned after the Power hold. Mention if the dryer is electric or gas. Each number points to a different circuit, so the exact one matters.

Need help with F01 to F04?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair