(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Built-In Microwave 1d22: Why the Sensing Path Is Flagged

On Whirlpool built-ins and drawers, 1d22 tells you the oven's temperature sensing path needs a look. The sensor, the control and the wiring are all possible, and no single part is blamed.

Needs attention soonChecked November 2026

What does Whirlpool microwave code 1d22 mean?

Units such as the WMC50522AS, a Whirlpool microwave drawer or built-in, flash 1d22 when the temperature sensing path reports a problem. Behind it could be the sensor, the control that reads it or the wiring joining the two. The message works as a circuit report, so it cannot prove that a particular part is dead. For as long as it shows, the oven may stop heating or turn down a function.

1d22 at a glance

Code
1d22
Appliance
Whirlpool microwave
Applies to
Whirlpool microwave drawers and built-ins, temperature sensing
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Sensor output that the control cannot make sense of

What you may notice with 1d22

  • 1d22 is shown on the display
  • Heating may stop partway through a cycle
  • Some functions are refused while the code stays up

How the microwave detects 1d22

Inside the oven, a temperature sensor hands the control a stream of readings. The control treats those readings as the truth about the oven, so it expects them to be steady, plausible and delivered over sound wiring. Any break in that expectation is reported as 1d22.

Because the sensor, the control and the wiring all sit in that path, the code cannot name one of them. A reading may be off, the control may interpret it badly, or a connection may have gone slack. Cutting power at the breaker resets the control's view, and if the code returns afterward, the path has a real condition worth measuring.

Likely causes of 1d22

  • Sensor output that the control cannot make sense of
  • Control that misreads the sensor line
  • Damaged or slack wiring along the sensor path
  • A brief glitch cleared by cutting power

Can you keep using the microwave with 1d22?

Wait for the code to clear before using functions that need temperature sensing. If a reset removes 1d22, you may cook again with the oven in view. If it returns, leave the microwave off, since it may stop heating without warning, and keep hands out of the cabinet and away from the wiring.

What you can safely check

  1. Shut off the microwave breaker and wait sixty seconds.
  2. Turn the breaker back on.
  3. Stand by the oven for a minute and watch for 1d22.
  4. If it stays away, run a quick heating test.
  5. If it comes back, do not open the cabinet, and call us.

What our technician does for 1d22

  • Test the sensing path link by link, from the sensor to the control to the connectors
  • Replace only a part that fails its test
  • Explain what we found and put the price in writing before work

How to keep 1d22 from coming back

  • Keep the oven interior clean so splatter does not collect near sensing parts.
  • Give the unit steady power and avoid sharing its circuit with heavy appliances where you can.

Technical reference

Code
1d22
Appliance
Whirlpool microwave
Control family
Whirlpool microwave drawers and built-ins, temperature sensing
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

1d22 questions

Why is my microwave showing 1d22 when it was working fine?

Something in the temperature sensing path changed. It may be a one-time glitch or a real problem with the sensor, control or wiring, and a breaker reset helps tell which.

What happens to cooking while 1d22 is displayed?

The oven may stop heating or refuse certain functions until the sensing path reads normally. Short, watched use is fine only after the code has cleared.

Can an older microwave drawer be repaired for 1d22?

Yes, older built-ins and drawers can be repaired after testing. We also say plainly when the cost is not worth it.

Is a surge able to trigger 1d22?

A disturbance in the supply can upset a control and raise a message that a restart clears. If the code keeps returning, the sensor path itself needs testing.

What should I tell the technician about 1d22?

Give the exact code, say whether a reset cleared it, and mention if the oven stopped heating mid-cycle. That lets us arrive ready to test the sensor, control and wiring.

Need help with 1d22?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair