(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Top-Load Washer Done Light On: What It Means

The Done light on a Whirlpool top-load HE washer means the wash cycle has finished. It stays on until you open the lid or press the power button, and it is not an error.

Normal status, not a failureChecked November 2026

What does Whirlpool washer code Done Light On mean?

On Whirlpool top-load HE washers in the Cabrio and WTW style, such as the WTW5000DW, WTW5105HW, WTW7500GC and WTW8500DC, the Done light tells you the cycle is over. The light keeps glowing until you do one of two things: lift the lid or press the power button. It is a status signal rather than an error, so a lit Done light with a finished load calls for no repair at all. The washer is simply waiting for you to take the laundry out.

Done Light On at a glance

Code
Done Light On
Appliance
Whirlpool washer
Applies to
Whirlpool top-load HE washers, Cabrio and WTW style
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Wash cycle finished as designed

What you may notice with Done Light On

  • The Done light glows when the cycle ends
  • The drum is quiet and the lid is still down
  • Clothes inside are washed and ready to remove
  • The light goes out as soon as you lift the lid

How the washer detects Done Light On

When a wash cycle reaches its last step, the control marks the cycle as complete and lights the Done indicator. This is the washer reporting its own status, not reacting to a part that has failed.

The light is then held on until the control sees one of two inputs from you. Lifting the lid trips the lid switch, and pressing the power button sends a command directly to the control. Either one tells the washer that someone has noticed the finished load, and the Done light goes out. Because the signal depends on you rather than on any sensor reading, a lit Done light after a normal cycle is simply the washer doing its job.

Why Done Light On appears

  • Wash cycle finished as designed
  • Lid not lifted since the cycle ended
  • Power button not pressed since the cycle ended
  • Finished load still sitting in the basket

Can you keep using the washer with Done Light On?

Yes. A lit Done light is not a warning, and the washer is working normally. Open the lid or press the power button to clear it, take out your laundry, and leave the lid up for a while so the drum can air out. You only need attention if the light appears before the cycle should have ended, or if it stays lit after the lid is lifted.

What you can safely check

  1. Make sure the cycle really is over and the basket has stopped moving before you lift the lid.
  2. Open the lid, which turns the Done light off, or press the power button.
  3. Take the finished load out.
  4. Leave the lid up for a while so the drum can air out.
  5. Call us only if the light comes on before the cycle should have ended.

What our technician does for Done Light On

  • Test the lid switch if the light behaves wrongly
  • Check the control if the cycle ends too early
  • Confirm the light turns off after the lid opens

How to keep Done Light On from coming back

  • Take the load out soon after the light comes on so damp clothes do not sit
  • Prop the lid open between loads to let the drum dry
  • Note which cycle you ran if the light ever shows too early

Technical reference

Code
Done Light On
Appliance
Whirlpool washer
Control family
Whirlpool top-load HE washers, Cabrio and WTW style
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

Models

Whirlpool models that can show Done Light On

Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.

FAQ

Done Light On questions

Is the Done light a problem?

No. It tells you the wash cycle has finished and the laundry is ready. The light stays on until you lift the lid or press power, which is how it is meant to behave.

Why does the light stay on after I empty the washer?

It only turns off when you lift the lid or press the power button. If you did neither, it keeps glowing as a reminder that the load is waiting.

Do you repair older top-load washers?

Yes. We test first, give you a written price before any work, and back the repair with a 30-day workmanship warranty. We also say so plainly when an older washer is not worth fixing.

Is the Done light the same as an error code?

No. An error code means the washer stopped because something went wrong. The Done light just reports that the cycle ended and the washer is waiting for you to open the lid or press power.

What should I report if the Done light acts strangely?

Tell us your model, such as the WTW5105HW, which cycle you ran and whether the light came on early or stayed on after the lid was lifted. That points us toward the lid switch or the control.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair