(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Washer Water Tap is Closed Symbol: Water Is Not Arriving

A red water tap symbol on a Whirlpool washer means no water, or not enough, is reaching the machine. Check the faucet, the inlet hose and its mesh filters first.

Needs attention soonChecked November 2026

What does Whirlpool washer code Water Tap is Closed mean?

A red water tap symbol on a Whirlpool washer, with no series named, means no water or not enough water is reaching the machine. The tap may be closed, an inlet hose may be kinked, the house pressure may be too low, the mesh filters in the inlet hose may be clogged, or the inlet hose may be frozen. The washer waits for the fill, stops and shows the symbol, so the cycle cannot move forward until the supply is restored.

Water Tap is Closed at a glance

Code
Water Tap is Closed
Appliance
Whirlpool washer
Applies to
Whirlpool washers, series not named
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Water faucet closed or only partly open

What you may notice with Water Tap is Closed

  • A red water tap symbol on the display
  • A tub that stays empty or barely fills
  • A cycle that stops waiting for water
  • A hose that looks bent, flattened or cold to the touch

How the washer detects Water Tap is Closed

When a cycle begins, the washer opens its inlet valve and expects water to flow into the tub within a set time. If the supply is missing or too weak, the fill never completes. The washer stops waiting, halts the cycle and displays the red water tap symbol so you know the problem is on the supply side.

Several things can restrict the flow before the washer ever sees it. The faucet may be closed or only partly open. The inlet hose may be kinked, or the mesh filters inside it may be clogged with debris. House pressure may be too low, and in a room that falls below 41 degrees Fahrenheit the water in the hose can freeze. Only when all of these are clear does a weak inlet valve or the control become the question.

Likely causes of Water Tap is Closed

  • Water faucet closed or only partly open
  • Kink in the inlet hose
  • Low household water pressure
  • Clogged mesh filters in the inlet hose
  • Frozen inlet hose in a cold room

Can you keep using the washer with Water Tap is Closed?

Open the faucet fully, straighten the hose and try again. If water flows and the cycle runs, you can keep using the washer. If the symbol stays, stop and do not keep restarting. In a cold room, warm the space and let a frozen hose thaw first. Have the supply and inlet valve tested if the problem returns.

What you can safely check

  1. Stop the cycle and unplug the washer, then turn off the water faucet before touching the hose.
  2. Open the water faucet fully again after the check.
  3. Make sure the inlet hose has no kinks.
  4. Clean the mesh filters in the inlet hose without moving or damaging them.
  5. Keep the washer in a room at least 41 degrees Fahrenheit, touch Start/Pause, and if the symbol stays, hold Power for three seconds and then call us.

What our technician does for Water Tap is Closed

  • Measure water pressure and flow at the hose
  • Test the inlet valve
  • Check the control reading of the fill

How to keep Water Tap is Closed from coming back

  • Keep the faucet fully open and the inlet hose free of kinks behind the washer
  • Clean the mesh filters in the inlet hose when the fill slows down
  • Keep the washer in a room at least 41 degrees Fahrenheit so the hose cannot freeze
  • Replace a stiff or aging inlet hose before it restricts the flow

Technical reference

Code
Water Tap is Closed
Appliance
Whirlpool washer
Control family
Whirlpool washers, series not named
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

Water Tap is Closed questions

Can a frozen hose really cause this?

Yes. If the room drops below about 41 degrees Fahrenheit, water in the hose can freeze and block the flow. Warm the room and let the hose thaw before trying again.

How do I clean the mesh filter safely?

Turn off the faucet, unscrew the hose and look for the small screen at the end. Rinse out the debris without pushing the screen out of place, then reattach by hand.

What if the water pressure is low?

Test other faucets in the house. If they also run weakly, the issue is in the plumbing. If only the washer struggles, the hose, screens or inlet valve need a look.

Does the water tap symbol mean my house has no water?

Not necessarily. It means the washer is not receiving enough. A closed faucet, a kinked hose or clogged mesh filters are the most direct suspects, and other taps in the house will show whether the problem is the plumbing or the washer.

What should I tell you about the water tap symbol?

Tell us the model if you can, whether the faucet is fully open, and whether other taps run strongly. Mention if the hose or filters were checked and whether the room was cold. That shows us where to start.

Need help with Water Tap is Closed?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair