Whirlpool Over-the-Range Microwave AccuPop Fail: Popcorn Sensor Problem
AccuPop Fail means a Whirlpool over-the-range microwave could not complete its popcorn function. The guidance points to the AccuPop sensor, and it is a convenience feature rather than a safety matter.
What does Whirlpool microwave code AccuPop Fail mean?
AccuPop Fail shows on Whirlpool over-the-range models including the WMH31017HS, WMH32519HZ and WMH53521HZ when the popcorn function cannot be completed. Guidance suggests the AccuPop sensor is the area to look at. Normally the microwave still powers on and can heat on timed cycles, but the sensor-driven popcorn setting halts and shows the message. Because only a convenience feature is affected, it is not primarily a safety concern.
AccuPop Fail at a glance
- Code
- AccuPop Fail
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool over-the-range microwaves, e.g. WMH31017HS
- Type
- Low urgency
- Can you clear it yourself?
- Sometimes, after the safe checks below
- Most likely cause
- An AccuPop sensor giving a reading the control cannot use
What you may notice with AccuPop Fail
- AccuPop Fail appears after you press the popcorn button.
- The popcorn function stops partway or will not begin.
- Timed cooking may still heat food as expected.
How the microwave detects AccuPop Fail
Sensor-based popcorn programs do not rely on a countdown timer. Instead, the AccuPop sensor watches the oven cavity while the bag heats and gives the control readings it uses to decide when to stop. The control needs those readings to be steady and believable before it runs the program.
When the sensor, its wiring or the control input stops delivering a readable signal, the control cannot judge the popcorn. It ends the function and shows AccuPop Fail. The rest of the microwave is not affected by this, which is why the oven may still power on and cook on a plain timer. Steam or grease near the sensor can be part of the picture, and that is why the interior gets wiped dry during the owner checks.
Likely causes of AccuPop Fail
- An AccuPop sensor giving a reading the control cannot use
- Wiring between the sensor and the control
- The sensor input on the control board
- A film of steam or grease built up near the sensor
Can you keep using the microwave with AccuPop Fail?
Using the microwave on timed cycles is generally fine while the popcorn function is out of action, since the message concerns a convenience feature. Skip the popcorn button until the sensor has been checked. If the oven also stops heating, behaves strangely on other programs, or you smell something burning, switch off the breaker and stop using it.
What you can safely check
- Stop any program; if the cavity is hot or smells scorched, let it cool with the door shut and switch off the breaker.
- Leave the breaker off for a minute and switch it on.
- See whether the message comes back during the next minute.
- Wipe the inside dry and make sure the door closes completely.
- Heat something on a plain timer. If AccuPop Fail keeps returning, call us.
What our technician does for AccuPop Fail
- Test the AccuPop sensor and its wiring
- Check the control input for the sensor
- Confirm timed cooking works so the heating system is ruled out
How to keep AccuPop Fail from coming back
- Wipe steam and grease film from the microwave interior and vents regularly, with the power off and the cavity cool.
- Leave the popcorn button alone after the message appears, rather than trying it repeatedly.
Technical reference
- Code
- AccuPop Fail
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool over-the-range microwaves, e.g. WMH31017HS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool models that can show AccuPop Fail
Models named for this code in Whirlpool documentation that have a page here. Check the full model number on the rating label before you act on a code.
Related Whirlpool microwave error codes
AccuPop Fail questions
What is the AccuPop function?
It is a sensor-based popcorn setting that judges cooking by what the AccuPop sensor reads instead of by a timer. When the sensor circuit cannot deliver, the microwave stops the function and shows AccuPop Fail.
Is it safe to use timed cooking after AccuPop Fail?
In many cases timed cooking keeps working and can be used. If the message appears every time or other functions behave oddly, stop and have the oven checked. Pressing the popcorn button again will not clear it.
Does AccuPop Fail point to the heating system?
Only if timed cooking is also affected. When timed cooking works but popcorn does not, the sensor circuit is what gets tested, not the heating system.
Is AccuPop Fail the same as an E code?
No. It is a plain-language message about one function, while an E code reports a circuit problem. The guidance ties AccuPop Fail to the sensor behind the popcorn setting.
Will AccuPop Fail clear on its own?
A power reset can clear a brief glitch. If the message returns the next time you use the popcorn function, the sensor circuit still has an issue, and it needs testing before that setting is relied on.
Need help with AccuPop Fail?
We trace the cause in your home first and write the price down before any part is swapped.
