Whirlpool Microwave ERROR during sensor cooking: Humidity Not Detected
A message of ERROR during sensor cooking on a built-in Whirlpool microwave or drawer means the sensor never detected humidity from the food. Look at the cooking setup first, because a failed part is less likely.
What does Whirlpool microwave code ERROR during sensor cooking mean?
Built-in Whirlpool microwaves and microwave drawers, the WMC50522AS among them, show ERROR during sensor cooking when the humidity sensor picks up no moisture from the food. Reasons include a cover that is not on properly, an unsuitable container, or a portion that gives off very little steam. In other words, the problem lies more in the cooking setup than in the hardware. The program ends, and you start it again.
ERROR during sensor cooking at a glance
- Code
- ERROR during sensor cooking
- Appliance
- Whirlpool microwave
- Applies to
- Whirlpool built-in microwave sensor cooking, WMC50522AS
- Type
- Normal status, not a failure
- Can you clear it yourself?
- Yes, it is a normal message or setting
- Most likely cause
- Too little steam coming from the food, or a cover not placed correctly
What you may notice with ERROR during sensor cooking
- ERROR appears while a sensor cooking program is running.
- The program ends early and the food is only partly heated.
- Timed cooking on the same microwave still works as normal.
How the microwave detects ERROR during sensor cooking
Sensor cooking does not count minutes. Instead, a humidity sensor follows the steam released as food heats, and the control reads how that steam rises to judge when the dish is done.
Should the sensor detect none of the moisture it expects, the control has nothing to work from and puts ERROR on the display. A dish left uncovered, a container the manual does not suggest, or a portion too small to release much vapor can all leave the sensor with nothing to read. The program then ends and waits for you to start again. Only when the message keeps coming back with food, cover and container set up correctly does the humidity sensor circuit itself come into question.
Why ERROR during sensor cooking appears
- Too little steam coming from the food, or a cover not placed correctly
- A sensor program chosen for the wrong food or container
- The humidity sensor itself giving a poor reading
- A momentary glitch in the control
Can you keep using the microwave with ERROR during sensor cooking?
Yes, the microwave is fine to use. This message asks you to look at the food, its cover and the container, and it is not a safety warning. Restart the program once the setup is corrected, or simply cook by time. If ERROR comes back every time with correct preparation, set sensor programs aside until the sensor has been checked.
What you can safely check
- Make sure the oven is idle, and let a hot dish cool before you handle it.
- Check how the food is covered and which container you used, then start the sensor program again.
- Find the Sensor Cooking pages of your owner's manual for the right setup.
- If ERROR keeps appearing, switch the breaker off for a minute, back on, and see whether it returns within the next minute.
- Cook something on a plain timer to check heating. Call us if ERROR repeats even with a correct setup.
What our technician does for ERROR during sensor cooking
- Test the humidity sensor and its circuit when ERROR repeats with properly prepared food
- Compare how timed cooking performs against sensor cooking
- Provide a written price before any repair
How to keep ERROR during sensor cooking from coming back
- Cover food the way your owner's manual describes for sensor cooking so enough steam builds up.
- Stick to the containers and portion sizes the manual lists for each sensor program.
Technical reference
- Code
- ERROR during sensor cooking
- Appliance
- Whirlpool microwave
- Control family
- Whirlpool built-in microwave sensor cooking, WMC50522AS
- Maker documentation
- Whirlpool owner manuals and support
- Checked
- November 2026
Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.
Related Whirlpool microwave error codes
ERROR during sensor cooking questions
Does this ERROR mean I need a repair?
Not at first. The message says the sensor sensed no humidity, which points to the food, its cover or the container before it points to a part. Correct the setup and restart before thinking about repair.
Why does the microwave need steam from the food?
Sensor cooking works out when food is ready by watching the humidity the food gives off. A small portion or an open dish may release hardly any, so the sensor has nothing to follow and the program ends with ERROR.
What if different foods all trigger it?
If several foods, each prepared as the manual describes, all bring up ERROR, the humidity sensor circuit becomes the suspect. Timed cooking that works while sensor cooking fails supports that and leads to sensor testing.
Would a larger portion help?
The guidance says the amount of food matters, since a small portion gives off too little steam. Use the portion sizes in your owner's manual for the program you chose, then restart the program.
Will the message disappear by itself?
Starting the program again after fixing the cover or container clears it when the setup was the cause. If it keeps returning, try a power reset next, and have the sensor tested after that.
Something else going on with your microwave?
We trace the cause in your home first and write the price down before any part is swapped.