(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Drawer Code F7 E3: Check the Water Filter

F7 E3 on a Whirlpool drawer-style microwave names the water filter alone; unlike the other F7 codes it has no wiring or sensor attached in the guidance.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F7 E3 mean?

Whirlpool built-in microwave drawers such as the WMC50522AS can show F7 E3, and the only thing the guidance names is the water filter. No sensor or wiring is listed, which sets it apart from its F7 neighbors. Functions that use water may not run while it shows. It sends our attention to the filter and where it sits in the water path. Whether the filter is actually clogged is left open.

F7 E3 at a glance

Code
F7 E3
Appliance
Whirlpool microwave
Applies to
Whirlpool WMC50522AS microwave drawer, water filter code
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A filter that is worn or past its change date

What you may notice with F7 E3

  • F7 E3 appears on the display
  • Water-using functions may refuse to start at all
  • The message returns after a breaker reset if the filter side is unchanged

How the microwave detects F7 E3

Water used by these built-in Whirlpool units passes through a filter before it reaches the parts that need it. The control treats the filter as part of the water path and watches whether it is doing its job.

F7 E3 is the message that names the filter by itself. In the F7 group it is the code lacking a sensor or wiring in its description, so the control is pointing at the filter and its connection to the water system. A filter may be worn, a wrong one may be fitted, it may be seated poorly, or the water supply to the unit may be restricted. The control cannot see which, and a power reset leaves the filter exactly as it was, which is why the code returns until the filter side is dealt with.

Likely causes of F7 E3

  • A filter that is worn or past its change date
  • A filter fitted loosely or not connected properly
  • A restricted flow of water reaching the unit

Can you keep using the microwave with F7 E3?

You can use the plain microwave functions while F7 E3 stays clear after a reset, and keep an eye on the display. If the code returns, avoid the functions that use water until the filter has been checked. Do not force a filter off or on yourself. Leaking water at the unit is a reason to switch the breaker off and stop using it.

What you can safely check

  1. Switch the microwave's breaker off, and do not unscrew or remove anything on the water side yourself.
  2. Leave it off a full minute, then restore power.
  3. Watch the display for sixty seconds.
  4. If F7 E3 stays gone, run a normal cycle.
  5. If it returns, note how long ago the filter was last changed and call us.

What our technician does for F7 E3

  • Confirm the filter is the correct one and properly seated
  • Check the water path to the unit
  • Look at other causes only after the filter side is cleared

How to keep F7 E3 from coming back

  • Replace the water filter at the interval the manual gives, and write the date somewhere you will find it.
  • Where hard or well water is supplied, expect the filter to need attention sooner and watch for slower flow.

Technical reference

Code
F7 E3
Appliance
Whirlpool microwave
Control family
Whirlpool WMC50522AS microwave drawer, water filter code
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F7 E3 questions

Must I buy a new filter when F7 E3 shows?

The message points at the water filter without proving it is spent. We inspect its condition and fit first, then tell you whether a replacement is the answer.

Is there a way for me to clear F7 E3?

A breaker reset is the single step worth trying. If the message returns, something about the filter or the water path is unchanged, and telling us when the filter was last swapped helps us plan.

Why would a microwave drawer have a filter?

Water is part of how this appliance works, which is why its guidance mentions a filter on the unit. We confirm the exact setup on your model during the visit.

Does F7 E3 always mean a clogged filter?

Not by itself. The code names the water filter, which could point to its condition, its fit or the water reaching it. We check each before saying a new filter is the answer.

Might a wrong filter trigger F7 E3?

It could, since the guidance points to the filter and its connection. If you fitted a replacement recently, tell us which one and how it was installed, so we know where to look first.

Need help with F7 E3?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair