(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Drawer F7 E1: Water Boiler Temperature Sensor

F7 E1 on a Whirlpool microwave drawer points to the sensor that measures boiler water temperature, or to the wires serving it, as the spot where a problem was reported.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F7 E1 mean?

A WMC50522AS or another Whirlpool built-in microwave drawer can show F7 E1 when the temperature sensor on its water boiler, or the wiring serving that sensor, is in question. Of the water-related F7 codes, this is the one about temperature. Anything that depends on the water system stays off while it is displayed. It tells us where to test and does not prove the sensor has failed.

F7 E1 at a glance

Code
F7 E1
Appliance
Whirlpool microwave
Applies to
Whirlpool WMC50522AS built-in microwave, water system group
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
A boiler temperature sensor that is reading wrongly

What you may notice with F7 E1

  • F7 E1 shows on the display
  • Features that use the water system are unavailable
  • The code returns after a reset if the sensor circuit still has a problem

How the microwave detects F7 E1

The water system in these built-in Whirlpool units includes a boiler, and the control tracks how hot that water gets. A temperature sensor on the boiler sends a reading through its wiring to the control, which uses it to decide whether a water-based function can start and when it should end.

F7 E1 appears when that reading is missing or does not make sense. A loose connector can drop the signal, a sensor can drift out of range, and a control input can misread what arrives. From where it sits, the control cannot tell these apart, so it blocks the water-related features and raises the code. Heating food with the plain microwave function is a separate system, but the message stays until the circuit is tested.

Likely causes of F7 E1

  • A boiler temperature sensor that is reading wrongly
  • A wire or plug at the sensor that has loosened
  • The control input that receives the sensor signal

Can you keep using the microwave with F7 E1?

If a breaker reset clears F7 E1, you may carry on and watch for a repeat. If it returns, avoid the water-related functions until they have been tested. The code concerns a temperature reading, so do not try to work around it by cutting power during a cycle. If you notice leaking or a hot smell, switch the breaker off and leave the unit alone.

What you can safely check

  1. At the electrical panel, turn this microwave's breaker off and leave the unit untouched.
  2. Sixty seconds later, turn it on.
  3. Look at the screen for a minute and see whether F7 E1 comes back.
  4. If it stays clear, run your usual function to be sure it works.
  5. If the code comes back, stop using the water-related functions and phone us.

What our technician does for F7 E1

  • Compare the sensor reading with what the control expects
  • Check the sensor wire and connector
  • Check the control input before replacing anything

How to keep F7 E1 from coming back

  • Let a water-based cycle finish before you shut power off at the breaker.
  • Keep the area around the unit dry so connectors near the water system are not exposed to moisture.

Technical reference

Code
F7 E1
Appliance
Whirlpool microwave
Control family
Whirlpool WMC50522AS built-in microwave, water system group
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F7 E1 questions

Does F7 E1 have to do with water temperature?

Yes, the boiler temperature sensor and its wiring are what the code names. Trouble is reported in that sensing circuit, though it does not say whether the sensor or the wiring is the cause.

Might F7 E1 disappear on its own?

A power reset can wipe a one-time reading. Should it return, the circuit is still complaining and deserves a test, since a repeat shows the cause is still there.

What happens at the visit?

You get a walk-through of the code, a test of the sensor circuit and wiring, a plain explanation of the result, and a written price before any repair starts.

How does F7 E1 relate to the other F7 codes?

It sits in the same water-related group, but each code has its own sensing circuit. We test the circuit your display names instead of assuming a shared cause.

Is F7 E1 covered by the maker warranty?

That depends on the age of the unit and the terms that came with it, so check your warranty terms. If you are unsure how to read them, ask us when you phone.

Need help with F7 E1?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair