(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Front-Load Washer F21: Washer Cannot Drain, Check the Hose

F21 on an older Whirlpool Duet or WFW front-load washer is a drain problem. The washer cannot get its water out, so look at the drain hose and standpipe first.

Needs attention soonChecked November 2026

What does Whirlpool washer code F21 mean?

F21 on Whirlpool front-load washers of the Duet and WFW series, such as the WFW5620HW, WFW9150WW and WFW90HEFW, is an older-generation code for a drain problem. The washer cannot get its water out, so it stops and shows F21. You may find water still in the drum and clothes that are not rinsed. The first things to check are a kinked or clogged drain hose. These older Duets are still in many homes, and we repair them.

F21 at a glance

Code
F21
Appliance
Whirlpool washer
Applies to
Whirlpool front-load washers, Duet and WFW series, older generation
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Kinked or crushed drain hose behind the washer

What you may notice with F21

  • F21 appears and the cycle stops
  • Water is still sitting in the drum
  • Clothes come out unrinsed and heavy
  • The drain hose behind the washer looks kinked

How the washer detects F21

After the wash and rinse steps, the washer pumps its water out through the drain hose and into the standpipe. The control expects the drum to empty within the time the cycle allows, and if it cannot, it stops and shows F21.

Most of the trouble sits in the path rather than the pump. A drain hose that is kinked or crushed behind the washer restricts the flow, and a clog in the hose or the standpipe holds the water back. When those are clear and the water still stays, the drain pump may be blocked or weak, which a technician tests after the hose. Because the problem can also come from the house drain, we check whether the washer or the line is slow.

Likely causes of F21

  • Kinked or crushed drain hose behind the washer
  • Clog in the drain hose or the standpipe
  • Drain pump that is blocked or weak

Can you keep using the washer with F21?

Not until the water has drained and the cause is found. A drum full of water is heavy, and forcing the door can flood the floor. Unplug the washer, straighten the hose and check for a clog. If the washer then drains normally, you can keep using it. If F21 returns, stop and have the drain pump and path tested.

What you can safely check

  1. Stop the washer, unplug it and put towels down before you touch the hoses.
  2. Look at the drain hose behind the washer and straighten any kink.
  3. Check the hose and the standpipe for a visible clog.
  4. Leave it unplugged for 5 minutes, then plug in and restart. Call us if F21 returns.

What our technician does for F21

  • Inspect the drain pump and its filter area
  • Tell a washer drain problem from a house drain problem
  • Check the hose path

How to keep F21 from coming back

  • Check the drain hose for kinks whenever you move the washer
  • Keep small items out of the drum by checking pockets
  • Watch for slow drains elsewhere in the home that hint at a house line problem

Technical reference

Code
F21
Appliance
Whirlpool washer
Control family
Whirlpool front-load washers, Duet and WFW series, older generation
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F21 questions

What does F21 mean on my Duet?

The washer detects a drain problem and stops. A kinked or clogged drain hose is the first thing to look at, followed by the drain pump and the house standpipe.

Is there a lot of water in the drum?

Possibly. Keep the washer unplugged and do not open the door by force. If the water level is high, call us and we drain it safely before opening anything.

Should I replace an older Duet for this?

Not necessarily. Drain repairs are often moderate compared with a new washer. We quote first and say plainly if the age of the washer says to save your money.

Is F21 the same as the fill code?

No. F21 is a drain problem, while the fill code is about water not getting in. Both are older-generation Duet codes, and in both cases the hoses behind the washer are the first place to look.

Will F21 clear by itself?

Only if the cause was a one-time slow drain. Once you clear a kink or clog and reset the washer, the code should go. If water still stays in the drum, the pump or the house line needs a look.

Need help with F21?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair