(813) 565-3059 Book a Repair
Whirlpool microwave error code

Whirlpool Microwave Code F3 E2: General Oven Sensor Circuit

On Whirlpool built-in microwaves and drawers, F3 E2 refers to the oven temperature sensor circuit without saying whether the upper or the lower sensor is involved. The control and the wiring are also listed.

Needs attention soonChecked November 2026

What does Whirlpool microwave code F3 E2 mean?

F3 E2 can appear on Whirlpool built-in microwaves and drawers, WMC50522AS being one example, and Whirlpool ties it to the oven's temperature sensor, to the control, or to the wiring. Its relatives F3 E0 and F3 E1 name the upper and lower sensors separately, but F3 E2 gives no position. The display shows the code and nothing further is named, so we use F3 E2 to choose which circuit to test.

F3 E2 at a glance

Code
F3 E2
Appliance
Whirlpool microwave
Applies to
WMC50522AS and other Whirlpool built-in microwaves
Type
Needs attention soon
Can you clear it yourself?
Sometimes, after the safe checks below
Most likely cause
Temperature sensor in the oven cavity

What you may notice with F3 E2

  • F3 E2 appears on the oven display
  • The oven does not carry on with normal cooking
  • The code may clear after a reset and then return days later

How the microwave detects F3 E2

Cooking in a built-in microwave with oven heating depends on the control knowing how hot the cavity is. A temperature sensor in the oven passes its reading along a wiring run to the control, and the control checks that the reading is possible and moves in step with the heating.

F3 E2 is the code for that check failing when Whirlpool does not narrow it to a position. The upper and lower sensors have codes of their own, so F3 E2 is the general one. The control may be unable to read the sensor, or the wiring may be interrupting the signal, or the board may be misreading it. Cycling the power restarts the control for a fresh look. If the reading is sound, the display clears. If not, F3 E2 comes back.

Likely causes of F3 E2

  • Temperature sensor in the oven cavity
  • Wire run linking that sensor to the control
  • Control board input for the sensor

Can you keep using the microwave with F3 E2?

Wait until the code is gone and stays gone. F3 E2 means the control may not know how hot the oven really is, and an oven in that state should not be trusted to regulate heat. After a reset, if the display is clear and a quick cycle behaves, you can use it with care. If F3 E2 comes back, leave the oven off until it has been tested.

What you can safely check

  1. Let the oven cool, then shut it down at the breaker.
  2. Leave it off for a minute.
  3. Power it up and watch the display for a minute; has F3 E2 reappeared?
  4. If not, run a quick cycle to confirm the oven performs.
  5. If it has, let us examine the sensor circuit.

What our technician does for F3 E2

  • Read the sensor circuit directly
  • Compare the reading with what the control expects
  • Check the wiring, then the control, and replace what proves to be the cause

How to keep F3 E2 from coming back

  • Wipe splatter out of the cavity promptly once it has cooled, so residue does not build up where the sensor sits.
  • Report a code that comes and goes early, instead of waiting for it to stay.

Technical reference

Code
F3 E2
Appliance
Whirlpool microwave
Control family
WMC50522AS and other Whirlpool built-in microwaves
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

F3 E2 questions

Why does F3 E2 leave out upper or lower?

Whirlpool's guidance names only the oven temperature sensor for this code, so the position is not part of the message. We settle which sensor is involved by testing on the oven.

Should I treat F3 E2 as a danger sign?

Whirlpool does not describe it that way, and it is a sensor circuit code. Still, an oven unable to read its own temperature is not one to rely on until someone has examined it.

What if the reset holds for only a day or two?

A fix that lasts that briefly points to a sensor or plug that drops out now and then. It deserves a proper test, and we explain our findings in plain language.

Is F3 E2 the same as F3 E0 or F3 E1?

They are related sensor codes. F3 E0 names the upper sensor, F3 E1 the lower, and F3 E2 the oven sensor without a position. All three come with the same reset, and we check the circuit for the one on your display.

What should I mention on the phone about F3 E2?

Read us the model number, say that F3 E2 is showing, and tell us whether the oven was heating when it appeared. If a reset cleared the code, tell us how long it stayed away.

Need help with F3 E2?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair