Whirlpool GW397LXUB repair
Gas slide-in range. Service for this model across Tampa Bay.

- Model
- GW397LXUB
- Type
- Gas slide-in range
- Brand
- Whirlpool
About the GW397LXUB
GW397LXUB is a slide-in gas range, also sold as GW397LXUB00, GW397LXUQ and GW397LXUS0 with different finishes. We read the whole label so parts match.
The range sits between countertops and connects to a gas line, with a 120-volt outlet for ignition and controls. If cooktop burners click but do not light, we inspect burner caps, ports and the spark module. If the oven stays cold, the igniter and gas valve are the first tests, because a weak igniter can glow without opening the valve. The gas connection gets a leak test as part of every visit, and the model and serial from the label go on every parts order.
What we check on a GW397LXUB visit
- Burner ignition and flame pattern
- Oven igniter glow and gas valve opening, plus broil burner lighting
- Temperature sensor, control knobs, clock and the gas connection
Key features
- Gas slide-in range
- Installed between cabinets for a flush look
- Also sold as GW397LXUB00, GW397LXUQ, GW397LXUS0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeGW397LXUB questions
My gas oven glows but never lights. What is wrong?
The igniter may have weakened and no longer draws enough current to open the gas valve. We measure it with a meter, replace it if weak and confirm the flame pattern.
A burner clicks without lighting. What do you do?
We clean the ports, check the cap seating and test the spark module. Food residue near the electrode is a frequent cause, and cleaning it costs nothing extra.
What do the endings on GW397LXUB mean?
They mark finishes and versions of the same range, and parts can differ between them. We match the part to your exact ending before ordering.