Whirlpool WDF510PAYW repair
White 24-inch built-in dishwasher. Service for this model across Tampa Bay.

- Model
- WDF510PAYW
- Type
- White 24-inch built-in dishwasher
- Brand
- Whirlpool
About the WDF510PAYW
Several wash cycles, a front control panel and a white finish come with the WDF510PAYW, a 24-inch built-in dishwasher also labeled with suffixes such as WDF510PAYWA.
We compare what you select on the panel with what the machine actually does. A cycle that will not start sends us to the door latch and switch, then the panel and control. Slow filling, leaks or food left behind lead us to the inlet valve, the door seal, the spray arms and the filter basket. Water remaining in the tub points to the drain hose, disposer connection and pump.
What we check on a WDF510PAYW visit
- Cycle selection and start response
- Door latch and switch
- Drain pump, filter basket, fill valve and spray arm holes
Key features
- 24-inch built-in dishwasher
- Front control panel
- Multiple wash cycles
- White finish
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dishwasher codes
Codes listed for Whirlpool dishwashers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dishwasher models
DishwasherDU810SWPQ24-inch built-in push-button dishwasher
DishwasherDU850SWPQ24-inch undercounter push-control dishwasher
DishwasherWDF110PABFront-control undercounter dishwasher
DishwasherWDF310PAABBlack 24-inch front-control dishwasher
DishwasherWDF331PAHBBlack front-control dishwasher, heat dry
DishwasherWDF518SAAB18-inch undercounter dishwasher
DishwasherWDF518SAHM24-inch stainless dishwasher with soil sensor
DishwasherWDF520PADM24-inch dishwasher with one-hour washWDF510PAYW questions
Why does my WDF510PAYW ignore the cycle buttons?
We check power to the control, the door latch and switch, then the button panel. A latch that does not register is a frequent reason a front-control dishwasher will not start.
Why is water left in the tub after a cycle?
The filter basket, drain hose or pump may be blocked. We clean the basket, check the hose and disposer connection, then test the pump with a full drain.