Whirlpool WEE510S0FB repair
Electric slide-in range. Service for this model across Tampa Bay.

- Model
- WEE510S0FB
- Type
- Electric slide-in range
- Brand
- Whirlpool
About the WEE510S0FB
WEE510S0FB is an electric slide-in range, also sold as WEE510S0FB0, WEE510S0FS0 and WEE510S0FW0 among other versions.
Many slide-in calls start with a single burner. The element may have failed, but the switch feeding it can be the cause, and so can a burned terminal. A meter separates the three, which is faster and cheaper than replacing parts in turn. For the oven, the bake element and sensor come first, followed by the door seal. A slide-in has little room around it, so we plan the pull-out in advance, protect the floor and counter edges, and put the range back level and flush with the countertop. We read the label before ordering any part and explain the price in writing first.
What we check on a WEE510S0FB visit
- Surface element heating and infinite switch response
- Bake element, broil element and wiring
- Temperature sensor and display
Key features
- Electric slide-in range
- Installed between cabinets
- Also found as WEE510S0FB0, WEE510S0FS0, WEE510S0FW0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWEE510S0FB questions
One burner will not heat but the others do. Where is the problem?
The element, its switch or its terminal. We test each with a meter and replace only the part that tests bad, which keeps the repair small.
Do you level the range after the repair?
Yes. We adjust the feet so it sits level and flush with the countertop, and confirm the anti-tip bracket is engaged before we leave.
Why do you need the serial number?
The model and serial label confirms the exact version, so the part fits the first time and you avoid a second visit for the same repair.