Whirlpool WEE515S0LS repair
Electric slide-in range. Service for this model across Tampa Bay.

- Model
- WEE515S0LS
- Type
- Electric slide-in range
- Brand
- Whirlpool
About the WEE515S0LS
The Whirlpool WEE515S0LS is an electric range in the slide-in style, designed to sit between two countertop runs. Because a digit can follow the base number, the complete label is how we learn which version stands in your kitchen.
For a WEE515S0LS visit, we begin on the control side: incoming power, connectors, then the panel, and only afterward the elements. A hot-surface light that stays lit, a preheat alert that never sounds, or a control lock that switches itself on all point that way. After a Florida storm outage, we also confirm the clock and settings were simply reset. A slide-in range fits snugly, so we plan the pull-out and push it back flush.
What we check on a WEE515S0LS visit
- Power supply and wiring connectors feeding the control panel
- The sensor and wiring behind the hot-surface light once the cooktop has cooled
- Surface elements, plus a thermometer comparison if baking changed after an outage
Key features
- Electric range with a slide-in design
- Made to fit between countertop sections
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWEE515S0LS questions
The cooktop light stays on after the burners cool. Is the range broken?
Not necessarily. That light follows a sensor, so we test the sensor and its wiring, and we let the surface cool completely before drawing any conclusion about the range.
Why would my control lock engage without me touching it?
A sticking key or a connector that has loosened behind the panel can trigger it. We inspect both and test the keypad before anyone suggests replacing a board.